Front wheel conversion kit with ball bearings suitable for the front 12" Grimeca cast wheel on your Gilera Citta moped / moped.
The advantages of this conversion kit include improved stability, reduced vibrations and a longer bearing life.
The set consists of two 6002 RS ball bearings and a red anodized aluminium spacer tube. The original 11 mm front axle can still be used.
Ø outer spacer tube: 20 / 14.9 mm
Total length of spacer tube: 62 mm
Ø inner spacer tube: 11.2 mm
Grooved ball bearing with dust cap:
Ø outer: 32 mm
Ø inner: 15 mm
Width: 9 mm
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Ø inside | 11.2 mm |
| Ø outside | 20 mm |
| Manufacturer | swiing® ingenious parts, CUBE |
| Ø shaft | 15 mm |
| Material | Aluminum, Steel |
| Surface | anodized |
| Shank length | 9 mm |
| Ball bearing closed | Yes |
| Total length | 62 mm |
Suitable for the following models
| Piaggio | Gilera Citta |
Accessories & related products
CUBE 6002 2RS ball bearing 15/32/9
Bearing type: Deep groove ball bearing · Stock number: 6002 · Ø inside: 15 mm · Ø outside: 32 mm · Width: 9 mm · Inner ring width: 9 mm · Manufacturer: CUBE · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Material: Plastic · Material: Steel
CHF 4.70
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø outside: 8 mm · Total length: 15 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Manufacturer: Magura · Thread length: 7 mm · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard
CHF 2.50
Magura set screw M6x34 mm lock nut SW8
Thread type: M6x1 (standard thread) · Thread length: 24 mm · Total length: 34 mm · Slotted: No · Ø Receptacle: 7.05 mm · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated
CHF 2.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder
CHF 2.80
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated
CHF 2.00
BING O-ring Bing SRE & 85, Ø 20 mm
Place of use: Carburetor · Cord thickness: 1.4 mm · Color: black · Ø inside: 17.2 mm · Ø outside: 20 mm · Manufacturer: BING · Number of components: 1 pcs · Material: Rubber · Surface: raw · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM number: 0250 160 101
CHF 2.90
Collection only possible with online purchase and appointment.
