39 mm cylinder head without decompressor bore to fit the 39 mm swiing original and tuning cylinder kit for Zündapp Belmondo mopeds, Zündapp Bergsteiger M25/M50 mopeds, as well as Alpa Spezial 3000 and Alpa Black River small motorcycles which have a Zündapp type 247 engine installed.
Top workmanship and highest fitting accuracy.
The shoulder on the gasket side ensures that the cylinder head is perfectly centered on the cylinder.
You can find the matching cylinders in the accessories section.
Pay attention: If you want to install this cylinder head on an original Zündapp cylinder, you must raise it by 1.5 mm to prevent the piston from touching the head.
Exceptional product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® ingenious parts |
Ø cylinder | 39 mm |
Decompressor | No |
Number of fixing points | 4 pcs |
Suitable for the following models
Zündapp Belmondo | |
Zündapp | 247 Motor |
Accessories & related products
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Contents [ml]: 10 ml · Color: green · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Temperature resistance (min.): -75 - 150 °C · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
CHF 21.90
CHF 2’190.00/l
swiing® ingenious piston 39 mm Vertex | Zündapp Belmondo Type 247
Manufacturer: swiing® ingenious parts · Nominal diameter: 39 mm · Ø outside piston (A): 38.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 26.3 mm · Curvature (D): 1.5 mm · Total piston height (E): 51.5 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Oblique push · Piston ring height: 1.5 mm
CHF 59.90
Moped fans like you also bought:
Bumm mirror round Inox
Clamping diameter: 22 mm · Manufacturer: Bumm · Material: Chrome steel (stainless steel) · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: M8x1.25 (standard thread) · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Total length: 360 mm · Mirror rod length: 300 mm · Thread size: M8
CHF 23.90
CHF 29.90
Fuel tap vertical M10x1 (to screw in) outgoing at the bottom / cast iron
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF10x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: straight · Reserve level: 65 mm · Mounting type: screw in (thread)
CHF 14.90