Strengthened clutch springs for the clutch on Puch E50 engines.
These tuning springs are 20% harder than the original springs, making them ideal for use in moderately tuned engines.
With tuned engines, the clutch often engages too early when the engine is not yet up to speed. With the tuning springs, the centrifugal clutch engages later and the additional power is optimally transferred to the rear wheel.
The scope of delivery includes 3 pieces.
Revised version of the previously offered compression spring.
Exceptional product for the highest demands of the quality brand swiing®.
Details
Spring design | Pressure spring |
Ø wire | 1.7 mm |
Manufacturer | swiing® ingenious parts |
Material | Spring steel |
Area of application | Tuning |
Surface | coated |
Color | blue |
Ø inside | 4.8 mm |
Ø outside | 8.3 mm |
Total length | 28 mm |
Number of components | 3 pcs |
Suitable for the following models
Puch | E50 |
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.35 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
CHF 2.40
swiing clutch springs reinforced (+50%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Manufacturer: swiing · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
CHF 17.90
swiing clutch springs reinforced (+60%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.9 mm · Manufacturer: swiing · Color: yellow · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
CHF 17.90
Moped fans like you also bought:
Clutch 3-jaw aluminum | Puch E50
Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 93 mm · Number of springs: 3 pcs · Thickness: 20.9 mm
CHF 49.90
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.5 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 2.90
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 1 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
swiing® ingenious crankshaft High End with mounted bearings (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: High End · Area of application: Racing · Material: Steel · Area of application: Tuning · Cheek type: Full cheeks · Thread type: MF10x1 (fine pitch thread) · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Number of gears: 1 pcs · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread length: 11 mm · Thread length: 15 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Weight: 968 g · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm
CHF 178.90