Threaded axle with closed groove ball bearings for front cast hubs (Leleu) on your Puch moped / moped.
The threaded axle set consists of a 167 mm long wheel axle, two special ball bearings, two half-height and two high M12x1 nuts and various spacers.
The innovation set works with Leleu front wheel hubs, which are installed in cast rims.
Version 2.0: The already greased bearings now have an outer diameter of 29.02 mm, which ensures an improved fit and are fitted with a dust cover on both sides.
Mounting instructions: When mounting the ball bearings, it is important to note that the long spacer bush between the two ball bearings must be clamped to ensure that the two bearings press with the inner ring on the bush. If this is not observed, the ball bearings will inevitably jam.
Other axle parts can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
Details
Ø inside | 12 mm |
Ø outside | 29.02 mm |
Total length | 165 mm |
Manufacturer | swiing® ingenious parts |
Material | Steel |
Surface | blue galvanized |
Width | 34.5 mm, 6.6 mm, 11 mm, 2.7 mm |
Height | 9.9 mm, 5.9 mm |
Width across flats SW | 19 mm |
Thread type | MF12x1 (fine pitch thread) |
Ø shaft | 11.95 mm |
Shank length | 74.5 mm |
Thread length | 50 mm, 40.5 mm |
Ball bearing closed | Yes |
Suitable for the following models
Puch |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: blue galvanized · Nut type: Hexagon nut · Thread type: MF26x1 (fine pitch thread) · Height: 10 mm · Width across flats SW: 19 mm · Drive: External hexagon · Thread depth: 10 mm · Area of application: Standard · Strength class: 8
CHF 2.00
swiing® ingenious wheel axle spoke hub front Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Ø inside: 12 mm · Total length: 165 mm · Height: 5.9 mm · Height: 9.9 mm · Ø outside: 29.02 mm · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Thread length: 40.5 mm · Thread length: 50 mm
CHF 38.90
swiing® ingenious rear wheel axle Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Diameter: 29 mm · Ø inside: 12 mm · Total length: 190 mm · Ø outside: 29 mm · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 19 mm · Shank length: 100 mm · Ball bearing closed: Yes · Thread length: 29 mm · Thread length: 53 mm
CHF 38.90
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 9 mm · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Material: Plastic · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 9 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Ball bearing closed: Yes
CHF 8.90
66HEROES pointed nut "Spike" M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Nut type: Pointed nut · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
CHF 6.90
Moped fans like you also bought:
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Thickness: 4.5 mm · Number of teeth: 45 pcs · Ø inside: 94 mm · Cranking (offset): 8 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm
CHF 19.90
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 12 mm · Ø outside: 28 mm · Stock number: 6001 · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 8 mm · Ball bearing closed: Yes · Area of application: Standard
CHF 5.90
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Ø outside: 11.8 mm · Total length: 185 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Shank length: 100 mm · Thread length: 26 mm · Thread length: 52.5 mm
CHF 14.90
swiing® ingenious rear wheel axle Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Diameter: 29 mm · Ø inside: 12 mm · Total length: 190 mm · Ø outside: 29 mm · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 19 mm · Shank length: 100 mm · Ball bearing closed: Yes · Thread length: 29 mm · Thread length: 53 mm
CHF 38.90