Galvanized steel cable bend for routing the speedometer cable on the fork of your Piaggio Ciao moped / moped or for universal use.
The cable bracket is attached to the rear swing arm bolt on Ciao models and ensures that the speedometer cable is routed neatly. It also minimizes the risk of the shaft becoming trapped between the tank and fork when turning in.
Details
Manufacturer | swiing® revival parts |
Material | Steel |
Number of components | 1 pcs |
Surface | blue galvanized |
Ø inside | 10 mm |
Ø mounting hole | 6.4 mm |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao |
Accessories & related products
Speedometer Veglia replica 60 km/h Ø 48 mm | Piaggio Ciao, SI, Bravo, Boxer
Color: Chrome · Color: white · Maximum speed: 60 Km/h · 4-edge speedometer cable: 2.7 mm · Thread type: MF11x0.75 (fine pitch thread) · Ø Receptacle: 48 mm · Ø outside: 51.8 mm · Depth: 50 mm · Total height: 68 mm
CHF 69.90
Not in stock
GPO speedometer set "Veglia replica" 16" | Piaggio Ciao
Ø outside: 51.8 mm · Manufacturer: GPO · Color: Chrome · Thread type: MF11x0.75 (fine pitch thread) · Color: red · Color: white · Maximum speed: 80 Km/h · Lighting: without · 4-edge speedometer cable: 2.55 mm · Ø Receptacle: 48 mm · Depth: 50 mm
CHF 84.90
Moped fans like you also bought:
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
CHF 84.90
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Area of application: Tuning · Color: black · Nominal diameter: 16 mm · Material: Aluminum · Carburetor type: SHA (type 4) · Total length: 82 mm · Ø without reducing sleeve: 21 mm · Width: 72 mm · Nozzle size: 82 · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Height: 111 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5 · Camouflaged: No
CHF 69.90
Nut M12x1 x 10 SW19 Wheel nut galvanized
Area of application: Standard · Material: Steel · Surface: blue galvanized · Nut type: Hexagon nut · Drive: External hexagon · Width across flats SW: 19 mm · Height: 10 mm · Thread depth: 10 mm · Thread type: MF26x1 (fine pitch thread) · Strength class: 8
CHF 2.00
Autosol Aluminum Polish 75 ml
Manufacturer: Autosol · Material to be used: Aluminum · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Contents [ml]: 75 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry
CHF 12.90
CHF 172.00/l
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Material: Steel · Surface: blue galvanized · Thread type: M7x1 (standard thread) · Ø outside: 11 mm · Drive: External hexagon · Screw head: Hexagon · Total length: 25 mm · Number of components: 6 pcs · Width across flats SW: 11 mm · Thread length: 19.5 mm · Area of application: Standard
CHF 3.90
swiing® revival clamping screw front brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Total length: 21 mm · Material: Steel · Surface: blue galvanized · Number of components: 3 pcs · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Ø shaft: 10.9 mm · Thread type: M7x1 (standard thread) · Thread length: 9.5 mm
CHF 5.40
swiing® revival clamping screw rear brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Total length: 21.5 mm · Material: Steel · Surface: blue galvanized · Number of components: 3 pcs · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Ø shaft: 10.5 mm · Thread type: M7x1 (standard thread) · Thread length: 11 mm
CHF 5.80