Set of clamping shells for mounting the handlebars on the fork plate of original and reproduction forks of various Puch mopeds / mopeds.
External dimensions (lxwxh): 47 x 17 x 26 mm
Hole spacing: 30 mm
Hole diameter: 7.3 mm
Material: aluminium, red anodized
Matching fastening screws, fork clamps and other fastening clamps can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Color | red |
| Surface | anodized |
| Width | 17 mm |
| Height | 26 mm |
| Total length | 47 mm |
| Ø mounting hole | 7.3 mm |
| Hole spacing | 30 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Puch |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
CHF 21.90
CHF 2’190.00/l
Screw M7x40 cylinder head Allen key galvanized (clamping bridge)
Manufacturer: Made in Italy · Material: Steel · Surface: blue galvanized · Thread type: M7x1 (standard thread) · Drive: Hexagon socket · Screw head: Cylinder head · Shank: No · Strength class: 8.8 · Thread length: 40 mm · Width across flats SW: 6 mm
CHF 2.40
Hot 
66HEROES Clamping bridges aluminum black | Puch
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Ø mounting hole: 7.3 mm · Total length: 49 mm · Number of fixing points: 2 pcs · Height: 26 mm · Width: 22 mm · Clamping diameter: 22 mm · Hole spacing: 30 mm · Color: black-matt
CHF 28.90
Moped fans like you also bought:
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 100 mm · Ø outside: 22 mm · Clamping diameter: 22 mm · Length handlebar ends: 150 mm · Mounting type: Fork plate · Width: 730 mm · Height: 400 mm · Crossbar: Yes
CHF 34.90
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
CHF 9.90
CHF 22.00/l
Hot
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Width: 50 mm · Vacuum connection: No · Total length: 66 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Height: 95 mm · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
CHF 79.90
Handlebar fork plate 30 cm curved with strut solid black
Material: Steel · Surface: varnished · Ø outside: 22 mm · Fork plate holder length: 80 mm · Length handlebar ends: 190 mm · Height: 280 mm · Crossbar: Yes · Width: 640 mm · Mounting type: Fork plate · Clamping diameter: 22 mm · Color: black
CHF 57.90
Not in stock
Collection only possible with online purchase and appointment.
