Spacer washer 13.5x27.8x1.0 mm for the right roller bearing of the pinion shaft of your moped / moped with Sachs 502, 50/2 and 503 engine.
Top quality, hardened and ground.
Ø inner: 13.5 mm
Ø outer: 27.8 mm
Thickness: 1.0 mm
Other accessories such as the bearing rollers and spacers for the pinion shaft can be found under accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Sachs spare part number: A1548
Details
| Thickness | 1 mm |
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | hardened & ground |
| Ø inside | 13.5 mm |
| Ø outside | 27.8 mm |
| Pony OEM number | A1548, A1547 |
| Sachs OEM number | 0244 039 000, 3510 004 004 |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 503 - AAL, 2AL / 2BL |
Accessories & related products
swiing® ingenious ball bearing pinion shaft 13/28/8 | Sachs 502, 50/2, 503
Bearing type: Deep groove ball bearing · Ø inside: 13 mm · Ø outside: 28 mm · Width: 8 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS1 - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage · Material: Steel
CHF 25.90
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Area of application: Standard · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Pony OEM number: A1149 · Sachs OEM number: 0232 017 006
CHF 24.90
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Width: 10 mm · Area of application: Standard · Ø inside: 15 mm · Ø outside: 40 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM number: 0932 007 001
CHF 24.90
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Nominal diameter inside: 13 mm · Ø outside: 18 mm · Ø outside: 21 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø inside: 12.5 mm · Ø inside: 15.2 mm
CHF 16.90
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Stock number: E15 · Ø inside: 15 mm · Ø outside: 35 mm · Width: 8 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Thread type: MF20.8x1 LH (fine/left-hand thread) · Material: Steel · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM number: 0286 079 105
CHF 49.90
swiing® revival thrust washer 16.6/31.2/1 pinion shaft | Sachs 502, 50/2, 50/3, 50/4, 503 (A1570)
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 16.6 mm · Ø outside: 31.2 mm · Thickness: 1 mm · Pony OEM number: A1570 · Sachs OEM number: 0244 078 000
CHF 11.90
Collection only possible with online purchase and appointment.
