High-quality thru axle M12x165 made of galvanized steel for various cast or wire spoke hubs on your Puch moped / moped.
The threaded shaft set is supplied with all axle nuts, spacers and intermediate sleeves fitted, as it will be installed later. Various cable ties show you where to fit what:
- Green cable tie: Brake anchor plate
- Red cable tie: Front wheel hub (17391, 18290, 29753, 29754)
- Yellow cable tie: Speedo drive (29943) or without speedo drive, with cover disk (10349) & spacer disk (26619)
You can find more axle parts in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | blue galvanized |
| Diameter | 12 mm |
| Width across flats SW | 19 mm |
| Ø shaft | 11.95 mm |
| Shank length | 75 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Total length | 165 mm |
| Thread length | 50 mm, 40 mm |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) |
Accessories & related products
swiing® ingenious wheel axle spoke hub front Ø 29 mm conversion kit with ball bearings | Puch
Ø inside: 12 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Total length: 165 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread length: 40.5 mm · Thread length: 50 mm · Height: 5.9 mm · Height: 9.9 mm · Ø outside: 29.02 mm · Width across flats SW: 19 mm · Ø shaft: 11.95 mm · Thread type: MF12x1 (fine pitch thread) · Shank length: 74.5 mm · Ball bearing closed: Yes
CHF 38.90
GPO cast wheel hub front | Puch Maxi, X30 NG-2AH
Manufacturer: GPO · Ø drum: 80 mm · Material: Cast aluminum · Color: silver · Ø axle: 12 mm · Thread length: 14 mm · Width: 54.5 mm · Wheel size [inch]: 17 " · Ø outside: 118 mm · Number of fixing points: 5 pcs · Ø Receptacle: 92 mm · Thread type: M8x1.25 (standard thread) · Ø bolt circle: 106 mm
CHF 57.90
Hot 
Spoked rim 17" front aluminum CNC solid silver
Ø Nipple hole: 6.6 mm · Material: Aluminum · Surface: anodized · Color: silver · Wheel size [inch]: 17 " · Rim well depth: 7.5 mm · Ø axle: 12 mm · Weight: 2700 g · Nominal diameter: 438 mm · Ø spoke: 3.5 mm · Overall width outside: 47 mm · Jaw width: 34.6 mm · Jaw width [inch]: 1.4 " · Ø Brake drum: 80 mm · Number of spoke holes: 36 pcs
CHF 239.90
Hot
Spoked rim 17" front aluminum CNC solid black
Ø Nipple hole: 6.6 mm · Material: Aluminum · Color: black · Surface: anodized · Rim well depth: 7.5 mm · Ø axle: 12 mm · Weight: 2700 g · Wheel size [inch]: 17 " · Nominal diameter: 438 mm · Ø spoke: 3.5 mm · Overall width outside: 47 mm · Jaw width: 34.6 mm · Jaw width [inch]: 1.4 " · Ø Brake drum: 80 mm · Number of spoke holes: 36 pcs
CHF 239.90
Transval speedo drive 17" with 12 mm axle | Puch Maxi S, N, X30 NS, NL, N-2AH, Velux
Manufacturer: Transval · Material: Aluminum · Color: gray · Place of use: left · Place of use: right · Ø axle: 12 mm · 4-edge speedometer cable: 2.6 mm · Wheel size [inch]: 17 " · Ø outside: 41 mm · Ø mounting hole: 12.2 mm · Overall width outside: 60 mm · Total height: 60 mm · Thread type: MF10x1 (fine pitch thread)
CHF 35.90
Moped fans like you also bought:
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm · Ø outside: 11.8 mm · Width across flats SW: 19 mm · Ø shaft: 11.9 mm · Thread type: MF12x1 (fine pitch thread) · Shank length: 100 mm
CHF 14.90
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: gray · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Shank: No · Thread type: M6x1 (standard thread) · Thread length: 22 mm · Number of components: 24 pcs
CHF 12.90
GPO cast wheel hub front | Puch Maxi, X30 NG-2AH
Manufacturer: GPO · Ø drum: 80 mm · Material: Cast aluminum · Color: silver · Ø axle: 12 mm · Thread length: 14 mm · Width: 54.5 mm · Wheel size [inch]: 17 " · Ø outside: 118 mm · Number of fixing points: 5 pcs · Ø Receptacle: 92 mm · Thread type: M8x1.25 (standard thread) · Ø bolt circle: 106 mm
CHF 57.90
Brake anchor plate front 12 mm axle (1A quality) | Puch Maxi S, N / X30 Sport NS, NL / Velux
Ø bore: 12.1 mm · Material: Aluminum · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø outside: 95 mm · Wide cam holder: 12 mm · Thread size: M6 · Brake lever length (lever length): 78 mm · Puch spare part no.: 349.1.40.007.2 · Puch spare part no.: 349.1.40.807.9
CHF 59.90
Not in stock
Collection only possible with online purchase and appointment.
