Special stud bolt set (centering sleeves) for Sachs 502, 50/2, 50/3, 50/4, 503, and 504 mopeds and small motorcycles.
The shaft in the center ensures that the cylinder is optimally guided and centered.
Thanks to the small wrench size, the nut can be installed with ease even in hard-to-reach areas at the base of the cylinder.
The increased tensile strength compensates for the difference in thread diameter.
Centering
bolt Length: 27 mm
Shank diameter: 6.1 mm
Thread: M6 / M5
Thread length: 14 / 10 mm
Stud strength class: 12.9
Nuts
: Thread: M5
; Height: 5 mm
; Wrench size: 8 mm; Hex
; Strength class: 10
; Material: Steel, galvanized
Washers
Inner diameter: 5.2 mm
Outer diameter: 12 mm
Height: 1.4 mm
Material: Steel, galvanized
Note: Depending on the cylinder’s manufacturing tolerances, it may be necessary to remove one washer so that the nut can be tightened properly.
A sophisticated product meeting the highest standards of the swiing® quality brand.
| Thread type | M6x1 (standard thread), M5x0.8 (standard thread) |
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | burnished, galvanized (blue) |
| Drive | External hexagon |
| Nominal diameter (thread) | 6 mm, 5 mm |
| Diameter | 6 mm |
| Total length | 27.3 mm |
| Thread length | 14 mm, 9.5 mm |
| Width across flats | 8 mm |
| Strength class | 12.9, 10 |
| Universal | |
| Sachs | 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
CHF 1.80
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
CHF 21.90
CHF 2’190.00/l
swiing® revival stud bolt M6x38 inlet/outlet galvanized (10.9 strength)
Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 38 mm · Nominal diameter (thread): 6 mm · Diameter: 5.9 mm · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
CHF 2.00
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
CHF 2.40
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 10.90
CHF 24.22/l
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 3.3 mm · Ø outside: 93.7 mm · Ø inside: 29.7 mm · Ø inside: 36 mm · Area of application: Standard · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
CHF 26.50
Hot
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 13 mm · Carburetor type: SSB · Hole spacing inlet: 31 mm · Mounting type: Flange · Camouflaged: No · Nozzle size: 75 · Total length: 132 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Width: 87 mm · Vacuum connection: No · Height: 85 mm · Choke control: without choke · Area of application: Standard · Area of application: Tuning
CHF 126.90
Hot
swiing® ingenious 41 mm cylinder kit Racing fan-cooled | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: No · Area of application: Racing
CHF 219.90
Not in stock
Working late? Evening hours on Thursday until 20:00
