Complete wiring harness with plug-in tongues for your Kreidler Flory MF 4, MP 1 moped / moped.
The wiring can of course also be used universally for all mopeds with the corresponding cable length.
This wiring harness, equipped with all cable clamps, is ready for installation and therefore only needs to be connected. No adjustments are required during installation.
Cable lengths:
Motor to lamp: 75 cm
Motor to rear light: 118 cm
Alternative cable lengths, cable clamps and other products for vehicle electrics can be found in the accessories section.
A quality product manufactured in Germany.
Details
Manufacturer | Made in Germany |
Number of cables | 3 pcs |
Cable bifurcation to motor | 750 mm |
Switch included | No |
Cable bifurcation to lamp | 750 mm |
Luster terminal | No |
Tail light cable length | 1180 mm |
Suitable for the following models
Kreidler | Flory MF |
Accessories & related products
Luster terminal 3-pole black small (0.1 - 2.5 mm²)
Cable cross-section: 0.1 - 2.5 mm · Number of connections: 6 pcs · Manufacturer: Made in Germany · Material: Brass · Material: Plastic · Material: Steel · Color: black · Number of components: 1 pcs · Clamping diameter: 3.3 mm · Total length: 18.5 mm · Area of application: Workshop accessories · Height: 15.5 mm · Width: 22 mm
CHF 1.40
swiing® revival wiring harness | Puch / Sachs
Manufacturer: swiing® revival parts · Area of application: Standard · Number of cables: 5 pcs · Cable bifurcation to motor: 870 mm · Switch included: No · Luster terminal: Yes · Cable bifurcation to lamp: 140 mm · Cable bifurcation to switch: 480 mm · Tail light cable length: 1000 mm
CHF 23.90
Protective conduit for cable Ø 5 / 10 / 15 mm (per meter) black
Manufacturer: Made in Germany · Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Ø inside: 5 mm · Ø inside: 10 mm · Ø inside: 15 mm · Ø outside: 6 mm · Ø outside: 11.5 mm · Ø outside: 16 mm · Area of application: Standard · Total length: 1000 mm
CHF 2.40
swiing® revival wiring harness MERIT light switch (version 2.0)
Manufacturer: swiing® revival parts · Cable cross-section [mm²]: 1.5 mm² · Area of application: Standard · Switch included: Yes · Number of cables: 5 pcs · Cable bifurcation to motor: 950 mm · Cable bifurcation to lamp: 230 mm · Cable bifurcation to switch: 400 mm · Tail light cable length: 1000 mm · Luster terminal: Yes · Ø Receptacle: 22 mm
CHF 39.90
Not in stock
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Area of application: Standard · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Material: Brass · Material: Steel · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Width across flats SW: 7 mm · Thread length: 7 mm
CHF 2.50
Magura set screw M5x34 mm
Slotted: No · Manufacturer: Magura · Ø cable holder: 2.55 mm · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated · Ø Receptacle: 7.05 mm · Thread type: M5x0.8 (standard thread) · Total length: 34 mm · Thread length: 24 mm
CHF 2.50
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR6 car valve · Wheel size [inch]: 17 "
CHF 14.90
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm
CHF 18.90
ESJOT sprocket 42 teeth galvanized | Kreidler MF2 / MP2
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø inside: 94 mm · Number of teeth: 42 pcs · Chain pitch: 1/2" x 3/16" · Ø bolt circle: 106 mm · Ø mounting hole: 6.4 mm · Number of fixing points: 4 pcs · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs · Cranking (offset): 8 mm
CHF 33.40