Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
Details
| Ø outside | 44 mm |
| Color | black |
| Manufacturer | Xtreme |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Total length | 260 mm |
| Ø Fastening inside | 10 mm |
| Ø spars | 28 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
MKX shock absorber 26 cm chrome
Number of fixing points: 2 pcs · Total length: 260 mm · Ø outside: 46 mm · Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Mounting type: Nuts & bolts
CHF 49.90
CHF 58.90
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Width across flats SW: 7 mm · Total length: 15 mm · Ø outside: 8 mm · Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Drive: External hexagon · Drive: Slot · Thread length: 7 mm
CHF 2.50
Spotlight round Ø 13 cm chrome / black
Number of fixing points: 2 pcs · Ø outside: 130 mm · Width: 134 mm · Height: 147 mm · Material: Sheet metal (steel) · Area of application: Standard · Depth: 80 mm · Surface: chrome-plated · Surface: varnished · Color: Chrome · Housing material: Metal · Color: black · Color: transparent · Lens material: Plastic · Bulb holder: BA15d · Speedometer recording: None · Thread size: M6 · Switch included: No · Battery operated: No · Test mark: none · Mounting type: Screws
CHF 24.90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
CHF 12.90
Collection only possible with online purchase and appointment.
