Original 38 mm cylinder kit for your Tomos moped / moped (old version) of the 2L, 3L, 4L series. The cylinder comes from the license replica of the Puch Velux and MS / MV engines.
The cast iron cylinder has a slight rust film due to years of storage. However, this can be easily removed with a little scotch and oil.
Corresponding add-on parts such as pistons, seal kit, stud bolts etc. can be found in the accessories section.
Cast-in number on the cylinder base: TUM142A
NOS – New from old stock.
Details
Manufacturer | Tomos |
Material | Gray cast iron |
Camouflaged | Yes |
Surface | raw |
Displacement | 50 ccm |
Area of application | Original |
Nominal diameter | 38 mm |
Hole pattern [mm] | 44 x 44 |
Outlet type | straight |
Thread outlet | M6x1 (standard thread) |
Number of fixing points | 4 pcs |
Suitable for the following models
Tomos |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm
CHF 39.90
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Width: 14.2 mm · Bearing cage: Silver cage · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Tomos spare part no.: 035548 · Alternative version of Sachs spare part no.: 0232 157 001
CHF 11.90
swiing® revival Set stud bolts M6x30 (strength 10.9) galvanized
Width across flats SW: 10 mm · Total length: 30 mm · Diameter: 6 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 12 mm · Strength class: 8 · Strength class: 10.9
CHF 10.60