38.0 mm replacement piston with two 2 mm rectangular piston rings with flank lock (FS) for the blown original Puch cylinder suitable for your X30 Velux and X30 Automat (ZA50) moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. In addition, you can find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
This piston is equipped with a short piston skirt.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Details
| Nominal diameter | 38 mm |
| Ø outside piston (A) | 37.95 mm |
| Compression height (C) | 22.9 mm |
| Curvature (D) | 3.2 mm |
| Total piston height (E) | 50.1 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 2 mm |
| Ø piston pin (B) | 12 mm |
| Piston weight | 74 g |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Number of components: 7 pcs · Area of application: (Dis)assembly tool
CHF 19.90
Moped fans like you also bought:
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Material: Aluminum · Ø cylinder: 38 mm · Area of application: Standard · Height: 35 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Ø outside: 90 mm · Ø screw holder: 6.4 mm · Decompressor: No
CHF 39.90
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 38 mm
CHF 8.90
GPO 38 mm original cylinder fan-cooled 12 mm KoBo | Velux/NG-2AH
Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Area of application: Standard · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Camouflaged: No
CHF 124.90
swiing® revival shim set crankshaft L17 | Puch Z50
Nominal diameter inside: 17 mm · Ø inside: 17.1 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø outside: 23.8 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm
CHF 8.90
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Total length: 30 mm · Manufacturer: swiing® revival parts · Material: Steel · Diameter: 6 mm · Surface: galvanized (blue) · Thread length: 12 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Width across flats SW: 10 mm · Strength class: 8 · Strength class: 10.9
CHF 10.60
swiing 38 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Manufacturer: Meteor · Manufacturer: swiing · Material: Gray cast iron · Area of application: Tuning · Surface: sandblasted · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Camouflaged: No · Hole spacing inlet: 32 mm
CHF 129.90
Collection only possible with online purchase and appointment.
