Highly polished stainless steel (chrome steel) pads for attaching clamp bars to the fork plate of your moped, moped or small motorcycle.
With the help of these two adapters, handlebars can be mounted on various fork plates.
To do this, two mounting holes are drilled into the fork plate. The substructures are attached there using the enclosed M8 screws.
Now conventional handlebars for fork plate mounting with a diameter of 22 mm can be fitted.
Thread for clamping brackets: M7 x 1 mm
Thread spacing: 30 mm
Height: 17 mm
Scope of delivery as shown in figure 1. Figures 2 / 3 are for illustration purposes only.
You can find a selection of matching clamps in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
Suitable for the following models
Universal | |
Puch |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
66HEROES steerer tube nut M26x1 closed pointed fork plate chrome
Drive: External hexagon · Thread type: MF26x1 (fine pitch thread) · Nut type: Pointed nut · Material: Steel · Surface: chrome-plated · Thread depth: 11 mm · Width across flats SW: 30 mm · Ø outside: 36.5 mm · Height: 53 mm · Manufacturer: 66HEROES
CHF 20.90
66HEROES Clamping bridges aluminum black | Puch
Material: Aluminum · Surface: anodized · Color: black-matt · Number of fixing points: 2 pcs · Ø mounting hole: 7.3 mm · Width: 22 mm · Clamping diameter: 22 mm · Height: 26 mm · Hole spacing: 30 mm · Total length: 49 mm · Manufacturer: 66HEROES
CHF 28.90
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm
CHF 2.00
swiing® revival screw M7x35 clamping bridge | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Area of application: Standard · Thread type: M7x1 (standard thread) · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 10.5 mm · Width across flats SW: 5 mm · Shank: No · Total length: 41.6 mm · Thread length: 34.6 mm · Strength class: 8.8 · Number of components: 1 pcs
CHF 2.90
swiing® revival front fender primed | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Color: black · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Mounting type: Nuts & bolts · Piaggio spare part no.: 274184
CHF 32.90
CHF 44.90
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Area of application: Standard · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Height: 13.8 mm · Thread depth: 12 mm · Width across flats SW: 30 mm
CHF 9.90
CHF 12.90
swiing® ingenious wheel axle cast hub front Ø 29 mm conversion kit ball bearings | Puch
Thread type: MF12x1 (fine pitch thread) · Material: Steel · Ball bearing closed: Yes · Surface: blue galvanized · Manufacturer: swiing® ingenious parts · Width: 2.7 mm · Height: 5.9 mm · Width: 6.6 mm · Height: 9.9 mm · Width: 11 mm · Ø shaft: 11.95 mm · Ø inside: 12 mm · Width across flats SW: 19 mm · Ø outside: 29.02 mm · Width: 34.5 mm · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Total length: 165 mm
CHF 38.90