45 mm special piston with a 0.96 mm rectangular piston ring with internal fuse (IS) for various Puch mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston kit contains piston pin, piston clips and piston ring.
The piston can only be used in combination with a machined cylinder head, as it is 3 mm shorter at the top. The sides of the racing piston are Teflon-coated, but this alone does not increase performance. The Teflon coating wears off during operation, but this does not damage the cylinder in any way.
Only for good, skilled mechanics / tuners.
You will find the appropriate assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer Athena.
Details
Manufacturer | Athena |
Surface | Teflon-coated |
Ø outside piston (A) | 44.96 mm |
Ø piston pin (B) | 12 mm |
Compression height (C) | 21.95 mm |
Curvature (D) | 3.97 mm |
Total piston height (E) | 49.6 mm |
Number of piston rings (F) | 1 pcs |
Piston ring mold | Rectangular ring |
Nominal diameter | 47 mm |
Piston ring impact | Internal fuse (IS) |
Piston ring height | 0.96 mm |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Width across flats SW: 10 mm · Width across flats SW: 17 mm · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs
CHF 19.90
CHF 29.90
Moped fans like you also bought:
ESJOT sprocket 45 teeth 4-hole coaster black
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of fixing points: 4 pcs · Ø inside: 94 mm · Ø mounting hole: 6.4 mm · Manufacturer: ESJOT · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Thickness: 4.5 mm · Hole spacing: 74 mm · Ø bolt circle: 105 mm
CHF 59.90
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Total length: 28 mm · Ø outside: 8.3 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Number of components: 3 pcs
CHF 17.90
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs
Width across flats (trigger): 27 mm · Total length: 55 mm · Total length: 75 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats Screw: 19 mm · Strength class: 8.8
CHF 9.90
CHF 12.00
Side stand black | Puch Maxi S, N, P1 / Supermaxi LG1, LG2 / X30 NS, NL, NG, N-2AH
Number of fixing points: 2 pcs · Total length: 340 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: powder-coated · Color: black · Adjustable: Yes · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp
CHF 18.90
Athena piston 45 mm #A | Puch
Manufacturer: Athena · Nominal diameter: 45 mm · Ø outside piston (A): 44.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 3.15 mm · Total piston height (E): 52.67 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: A
CHF 49.70