Bladed 41 mm (55 ccm) cylinder kit with 12 mm piston pin, suitable for your Puch X30 Velux and X30 NG-2AH moped / moped and with adaptations to your DS, MV, MS, VZ (EX50) small motorcycle
The timing was kept rather low on the cylinder, which is characterized by a very nice torque in the lower speed range.
Details:
Cast iron reproduction cylinder with Ø 41.0 mm bore
Slot-controlled
Ø 19 mm intake, 32 mm stud spacing
Optimized overflow channels
Improved timing
No need for spindling of the engine housing (Ø cylinder neck 45.0 mm)
Ø 25 mm outlet, 42 mm stud bolt spacing
Hole pattern stud bolt: 44 x 44 mm
Incl. Ø 41 mm piston from the Italian manufacturer -GOL-
Notes:
For Puch Velux engines, the slot on the housing no longer needs to be cast on thanks to the large sealing surface.
For ZA50-G engines, the housing may need to be spindled on.
The cylinder kit can also be used on DS, MV, MS, VZ (EX50) engines, provided the housing is spindled on.
Corresponding accessories such as gaskets, cylinder head, exhaust system etc. can be found in the accessories section.
Made by the BADASS brand.
Details
Manufacturer | BAD ASS |
Area of application | Tuning |
Material | Gray cast iron |
Surface | sandblasted |
Ø cylinder neck | 44.9 mm |
Nominal diameter | 41 mm |
Ø outlet inside | 25 mm |
Ø Inlet inside | 19 mm |
Ø piston pin (B) | 12 mm |
Thread inlet | M6x1 (standard thread) |
Hole spacing inlet | 32 mm |
Hole spacing outlet | 42 mm |
Outlet type | straight |
Thread outlet | M6x1 (standard thread) |
Hole pattern [mm] | 44 x 44 |
Number of fixing points | 4 pcs |
Decompressor | No |
Camouflaged | No |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Hole spacing inlet: 32 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle size: 62 · Area of application: Tuning · Mounting type: Flange · Mounting type: Plug connection clamped
CHF 122.80
swiing resonance exhaust set Ø 28 / 70 mm | Puch X30 Velux
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Flange
CHF 149.90
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 6 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Width across flats SW: 10 mm · Strength class: 8 · Strength class: 10.9 · Total length: 30 mm · Thread length: 12 mm
CHF 10.60
GOL piston 41 mm BAD ASS Lucifer | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Ø outside piston (A): 40.94 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Weight: 86 g
CHF 69.90
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Area of application: Tuning · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø cylinder: 41 mm · Number of components: 4 pcs · Ø outlet inside: 27 mm · Hole spacing outlet: 32 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
CHF 19.90
GPO Ø 41 mm "Sombrero" cylinder kit | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 44.7 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
CHF 199.90
Moped fans like you also bought:
swiing® ingenious flame tube 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 25 mm · Ø outside: 28 mm · Total length: 380 mm · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm · Mounting type: Stud bolts & nuts · Color: Chrome
CHF 39.90
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
CHF 8.90
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Total length: 66 mm · Width: 50 mm · Height: 95 mm · Manufacturer: swiing · Area of application: Tuning · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 79.90
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Hole spacing inlet: 32 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle size: 62 · Area of application: Tuning · Mounting type: Flange · Mounting type: Plug connection clamped
CHF 122.80
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Area of application: Tuning · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø cylinder: 41 mm · Number of components: 4 pcs · Ø outlet inside: 27 mm · Hole spacing outlet: 32 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
CHF 19.90