Drive belt with 112.5 mm length for your Piaggio Si moped / moped with mono drive.
The following combinations are possible with this mono belt:
| Ø clutch | Ø Pully | Engine position | Pully type |
| 56 mm | 75 mm | Back | swiing® |
| 56 mm | 70 mm | Center | swiing® |
| 56 mm | 70 mm | Center - front | Surflex |
| 56 mm | 65 mm | Front | swiing® |
| 56 mm | 65 mm | Front | Replica |
| 66 mm | 60 mm | Center - rear | swiing® |
| 66 mm | 60 mm | rear | Replica |
| 66 mm | 55 mm | Center - front | swiing® |
| 66 mm | 55 mm | Center | Replica |
Note: Check the diameter of your mono clutch and pully before purchasing to ensure you order the correct drive belt.
You can find more Pully belts, alternative Vario variants as well as drive pulleys and clutches in the accessories section.
Quality product from the German manufacturer BOSCH in original equipment quality.
Details
| Manufacturer | BOSCH |
| Outer width | 10 mm |
| Height | 8.2 mm |
| Rolling circumference | 1125 mm |
| Belt profile | toothed / serrated |
| Gearbox type | Mono |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
CIF Clutch 56 mm | Piaggio, Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Material: Steel · Ø Outer pulley: 56 mm · Area of application: Standard · Ø inside: 82 mm · Ø outside: 90 mm · Number of jaws: 2 pcs · Number of jaws: 3 pcs · Number of springs: 2 pcs · Number of springs: 3 pcs
CHF 89.90
Not in stock
Moped fans like you also bought:
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Length spring hook: 50 mm · Leg length: 45 mm · Total length: 125 mm · Ø outside: 30 mm · Material: Spring steel · Surface: blue galvanized · Ø inside: 25.5 mm · Ø wire: 2.4 mm · Area of application: Original · Area of application: Standard
CHF 4.90
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Test mark: none · Color: black · Color: red · Bulb holder: BA15s · Ø Receptacle: 4 mm · Tension: 6 V · Battery operated: No · Mounting type: Nuts & bolts · Width: 60 mm · Depth: 80 mm · Height: 110 mm · Number of fixing points: 2 pcs
CHF 36.50
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Wheel size [inch]: 17 " · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
CHF 34.90
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Cable available: Yes · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Area of application: Original · Area of application: Standard · Number of fixing points: 1 pcs · Alternative version of the Pony Spare part no.: A4606 · Alternative version of the Pony Spare part no.: A4606A · Pony spare part no.: A4607 · BOSCH spare part no.: 1 217 013 025 · Alternative version of Sachs spare part no.: 0983 106 000 · Alternative version of Sachs spare part no.: 2783 039 001 · Sachs spare part no.: 0283 116 102 · BERU spare part no.: 0 340 100 710
CHF 19.80
Collection only possible with online purchase and appointment.
