swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust)
Manufacturer: swiing® ingenious parts · Color: Chrome · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Total length: 730 mm · Exhaust type: Cigar
CHF 99.90
CHF 109.90
Exhaust 22 mm original 2-piece | Puch Maxi S, N
Manufacturer: Puch · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Flange · Ø Flame tube outside: 22 mm · Exhaust type: Dragpipe / sharp end · Number of fixing points: 6 pcs · Flame tube attachment: Stud bolts & nuts
CHF 154.90
GPO exhaust clamp solid 28 - 30 mm galvanized (strength 12.9)
Manufacturer: GPO · Material: Steel · Color: silver · Surface: blue galvanized · Width: 42.5 mm · Total length: 46 mm · Mounting type: Nuts & bolts · Ø inside: 28 - 30 mm · Ø outside: 41 mm · Material thickness: 1.6 mm · Pony spare part no.: A1897 · Sachs spare part no.: 0251 113 105
CHF 7.90
MOTIP heat-resistant paint black 400 ml
Manufacturer: MOTIP · Area of application: Paint & varnish · Color: black · Contents [ml]: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): 0 - 800 °C
CHF 24.90
Not in stock
CHF 62.25/l
GPO exhaust flute Ø 28 / 60 mm original | Sachs 50/2, 503
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Ø outside: 20 mm · Total length: 560 mm · Color: Chrome · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Exhaust type: Flute · Mounting type: Screwed clamp · Flame tube attachment: Plug connection clamped
CHF 99.90
Motorex black high temperature paint 400 ml
Temperature resistance (min.): 0 - 400 °C · Manufacturer: Motorex · Lacquer type: Plastic paint · Area of application: Paint & varnish · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Color: black · Contents [ml]: 400 ml · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 22.90
CHF 45.80/l
GPO exhaust clamp 55 mm chrome (version 2.0) | Puch X30 Velux
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Thickness: 2 mm · Clamping diameter: 53 - 55 mm · Nominal diameter: 55 mm · Width: 15 mm · Ø outside: 57 mm · Ø outside: 59 mm · Ø mounting hole: 7 mm · Ø mounting hole: 9.1 mm · Number of fixing points: 1 pcs
CHF 23.90
CHF 29.90
Page 1 of 4
The exhaust silencer on your moped not only serves to reduce the noise emissions of your Puch Maxi, Sport X30 or X30 NG-2AH moped to a level that is tolerable for others. In addition, it is responsible for optimally dissipating the exhaust gases from the combustion of the fuel-air mixture. In this way, it contributes to maximum power output. Of course, this is especially the case if you opt for a tuning exhaust system including silencer. With us, you will not only find original silencers as spare parts for your Puch Maxi or Velux moped. We also have a wide selection of exhaust tuning parts and flame pipes for Austrian mopeds from renowned manufacturers such as Tecno, Homoet or Proma, always including a matching exhaust clamp, of course.
As the entire exhaust is attached with just a few screws, it is not difficult for beginners to replace it if necessary. This may be necessary, for example, if the original silencer is corroded due to its age and rust has already eaten holes in it. However, a suitable exhaust is also essential for a harmonious tuning setup on your moped. Because you can only get the maximum performance out of your Hödi if all the tuning parts are perfectly matched. However, this is generally not possible with an original exhaust.
For your moped, such as the beautiful Puch X30 or the legendary Puch Maxi moped, we offer you original silencers and always the right tuning silencer from well-known brands such as GPO, Jamarcol, MLM and 66Heroes. Of course, you can also buy a silencer from our own brand swiing, including a matching exhaust clamp. Every exhaust silencer available from us for Puch mopeds such as the Puch-Maxi-Töffli, the Monza-Hobel or the X30-Perle is optimally matched to the respective model, so that an excellent fit is guaranteed. This makes installation simple and easy. The same applies to every exhaust clamp that you order from us to match your new silencer. This means you can easily replace the entire exhaust system on your moped.
Is your Puch maxi pearl getting on in years and needs a new exhaust system? Whether you opt for an original muffler for your maxi moped or would prefer to install a tuning muffler on your X-30 slicer for more power, you'll find what you're looking for here. In our online shop, you can get first-class branded goods including matching exhaust clamps at a fair price, allowing you to repair or upgrade the performance of your moped for little money. From exhaust silencers for Puch models to many other tuning parts for your moped, almost all the products we offer are available directly from stock. We are happy to support you if you have any questions about a specific part or need advice. Simply send us an e-mail or give us a call.