High-quality clutch cable or brake cable (inner cable) suitable for various mopeds, mopeds and small motorcycles.
This cable was installed as a clutch cable on models such as the Puch Maxi, Sachs, Hercules, Pony, Solex or Zündapp.
On Piaggio Ciao mopeds, it is used as standard for the front brake.
Other parts such as end sleeves, cable sleeves or cable cutting pliers can be found in the accessories section.
A quality product manufactured in Germany.
Details
| Ø nipple | 3.5 mm, 6 mm |
| Nipple length | 10 mm |
| Manufacturer | Made in Germany |
| Number of components | 1 pcs |
| Material | Steel |
| Surface | galvanized (blue) |
| Ø Stranded wire | 1.5 mm |
| Nipple shape | Pears |
| Cable length | 1600 mm |
| Piaggio OEM number | 270460 |
Suitable for the following models
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Cilo | |
| Hercules |
Accessories & related products
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 14.70
CHF 73.50/l
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø outside: 8 mm · Total length: 15 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Manufacturer: Magura · Thread length: 7 mm · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard
CHF 2.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
CHF 2.80
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
CHF 2.40
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
CHF 2.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm
CHF 2.00
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Piaggio OEM number: 270460
CHF 2.40
Collection only possible with online purchase and appointment.
