Shift lever suitable for Sachs 50 engines.
These are those engines that correspond to the type 50/2, but are equipped with the small Bing SSB carburetor without air filter cap and with a chain drive from the crankshaft to the clutch basket.
Attention: This shift shaft cannot be used with conventional Sachs 50/2 engines, as the fixing screw is not countersunk and would therefore touch the air filter cap.
Details
| Material | Steel |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) |
Accessories & related products
swiing oil drain plug M10x1 | Sachs 50/2, 503 2AL/2BL, 504/2 (A1470)
Material: Steel · Surface: burnished · Manufacturer: swiing · Drive: External hexagon · Screw head: Hexagon · Width across flats Screw: 14 mm · Thread type: MF10x1 (fine pitch thread) · Pony spare part no.: A1470 · Sachs spare part no.: 0241 029 000
CHF 8.90
swiing® revival manual shift spring | Sachs 50/2, 503 2AL, 2BL (A1337)
Spring design: Tension spring · Total length: 28 mm · Length spring hook: 8 mm · Ø wire: 1.25 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: burnished · Color: gray · Ø inside: 6 mm · Ø outside: 8.5 mm · Pony spare part no.: A1337 · Sachs spare part no.: 0239 102 100
CHF 10.90
swiing® revival T-slot nut new version | Sachs 50/2, 503 2AL/2BL (A1910)
Manufacturer: swiing® revival parts · Material: Steel · Surface: Hardened · Total length: 8.85 mm · Width: 4.22 mm · Total height: 7.5 mm · Ø Pin: 3.95 mm · Pony spare part no.: A1910 · Sachs spare part no.: 0259 021 000
CHF 10.90
Moped fans like you also bought:
Magura cable clamp Sachs shift/clutch arm
Total length: 11 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø shaft: 4 mm · Ø Cable bushing: 2.8 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 7 mm · Ø Bundle: 7 mm · Thread length: 7 mm · Width across flats SW: 6 mm
CHF 2.50
GPO Horn 12V chrome (AC - alternating current)
Manufacturer: GPO · Material: Steel · Tension: 12 V · Color: Chrome · Surface: chrome-plated · Type of current: Alternating current (AC) · Width: 70 mm · Height: 35 mm · Ø outside: 70 mm · Mounting type: Screws · Number of fixing points: 2 pcs
CHF 19.90
swiing® revival cylinder base gasket cylinder 0.3 mm | Sachs 503
Ø inside: 45 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Oiled paper · Ø cylinder: 38 - 40 mm · Place of use: Cylinder base · Nominal diameter: 45 mm · Thickness: 0.3 mm · Hole pattern [mm]: 60 x 40
CHF 3.40
Not in stock
Main stand black | Sachs Pony GTX / GTA 16" rim (P1776)
Manufacturer: Pony · Material: Steel · Surface: varnished · Stand base - center mount (A): 220 mm · Total width of stand base (B): 230 mm · Color: black · Wide receptacle (C): 69 mm · Ø Receptacle (D): 12 mm · Spring nipple distance - center pivot axis (E): 70 mm · Wide upright foot (F): 20 mm · Total height: 235 mm · Pony spare part no.: P1776
CHF 109.90
Collection only possible with online purchase and appointment.
