41mm tuning cylinder with square intake for Sachs 3- and 4-speed engines with blower, which were installed on Hercules 50/ALS 50/2 S 50/KS 50/2 DK 50/3 LS 50/4 LKS, Gritzner etc., among others.
The smaller cooling fins make it easier to adapt to a Swiss Sachs 50/2 (502) engine, as the fan cowl can be fitted without adjustments. However, adjustments in the area of the stud bolt holes are essential.
The cylinder should preferably be used with a 17 mm Bing carburettor.
Exhaust thread: M40x1.5
Ø outer: ~92 mm
Ø bore: 41.01 mm
The cylinder is supplied without the piston.
You will find the matching add-on parts in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Material | Gray cast iron |
| Surface | raw |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Nominal diameter | 41 mm |
| Ø Outlet outside | 40 mm |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Hole spacing inlet | 31 mm |
| Outlet type | Union nut |
| Cooling type | Fan air cooling |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Total length: 116 mm · Material: Aluminum · Camouflaged: No · Width: 86 mm · Carburetor type: SSB · Height: 99 mm · Nominal diameter: 17 mm · Mounting type: Stud bolts & nuts · Nozzle size: 76 · Ø fuel hose connection: 6.2 mm · Mixed oil connection: No · Hole spacing inlet: 31 mm · Vacuum connection: Yes · Choke control: without choke · Area of application: Standard · Area of application: Tuning · Nozzle thread: MF7x0.75 (fine pitch thread) · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 79.90
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Nominal diameter: 40 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Piston weight: 86 g
CHF 39.90
swiing® ingenious cylinder head gasket 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder head · Thickness: 0.3 mm · Nominal diameter: 41 mm · Ø inside: 41.7 mm · Ø cylinder: 41 mm · Hole pattern [mm]: 37 x 37 · Area of application: Standard
CHF 4.90
Not in stock
Moped fans like you also bought:
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Total length: 116 mm · Material: Aluminum · Camouflaged: No · Width: 86 mm · Carburetor type: SSB · Height: 99 mm · Nominal diameter: 17 mm · Mounting type: Stud bolts & nuts · Nozzle size: 76 · Ø fuel hose connection: 6.2 mm · Mixed oil connection: No · Hole spacing inlet: 31 mm · Vacuum connection: Yes · Choke control: without choke · Area of application: Standard · Area of application: Tuning · Nozzle thread: MF7x0.75 (fine pitch thread) · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 79.90
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Total length: 23 mm · Diameter: 4.9 mm · Thread length: 6 mm · Thread length: 12 mm · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM number: 0640 016 101 · Sachs OEM number: 0640 016 102
CHF 1.80
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Nominal diameter: 40 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Piston weight: 86 g
CHF 39.90
GPO 41 mm cylinder kit (square intake) | Sachs 50/3, 50/4 fan-cooled
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Camouflaged: No · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Surface: sandblasted · Area of application: Tuning · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Hole pattern [mm]: 51 x 40 · Number of fixing points: 4 pcs
CHF 149.90
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Width: 8 mm · Ø inside: 15 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Ø outside: 35 mm · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM number: 0286 079 105
CHF 49.90
Collection only possible with online purchase and appointment.
