Original reproduction air filter for your Puch Supermaxi LG1, LG2 moped / moped with catalytic converter.
The air filter box is supplied in disassembled condition.
To make assembly easier, we recommend briefly placing the air filter housing in warm water to soften the plastic.
Carburetor connection diameter with Büchse: 20 mm (can also be mounted on a normal Puch Maxi S or N, but the flange must be shortened)
Carburetor connection diameter without Büchse: 28 mm
Select the desired air filter screen in the selection field:
- Standard: original air filter screen
- Racing: Screen with fewer filter layers for more air flow
- Tuning: two-layer filter mat for maximum air flow
Note: From the factory, a joint with silicone sealant was drawn around the seam of the original air filter after the two parts were joined to eliminate the risk of air leakage. We recommend doing the same with this air filter.
You will find a suitable sealant and other useful parts in the accessories section.Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Manufacturer: GPO · Camouflaged: Yes · Color: black · Material: Plastic · Filter type: Box · Ø Internal connection: 20 mm, 28 mm · Mounting type: Plug connection clamped · Area of application: Tuning
Details
| Manufacturer | GPO |
| Color | black |
| Material | Plastic |
| Filter type | Standard sieve, Racing screen, Foam |
| Mounting type | Plug connection clamped |
| Ø Internal connection | 28 mm |
| Area of application | Standard, Tuning |
| Camouflaged | Yes |
Suitable for the following models
| Puch |
Accessories & related products
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
CHF 15.90
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
CHF 19.90
CHF 284.29/l
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs
CHF 2.80
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
CHF 12.90
Hot 
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Width: 47 mm · Vacuum connection: No · Total length: 65 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Height: 89 mm · Height: 109 mm · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
swiing® ingenious intake manifold 17 mm SRF | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 38 mm · Ø inside: 17 mm · Hole spacing inlet: 38 mm · Height flange center hole: 42 mm · Total height: 53.5 mm · Mounting type: Stud bolts & nuts · Ø External connection: 23 mm · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs
CHF 44.90
Collection only possible with online purchase and appointment.
