Practical, galvanized steel tube for reaming fork tubes and other through tubes on your bicycle, moped, moped, small motorcycle and motorcycle.
The reaming tube can be clamped in any standard cordless drill. A cleaning cloth can be clamped through the slots (two different widths), as well as sandpaper in various sizes. The inner diameter of the pipe to be sanded / cleaned is determined by winding several layers around the lance.
Length: 400 mm
&slash; outer: 10 mm
Slot length: 50 mm
Slot width: 1 mm / 2.5 mm
Thread: M8 (splayed)
To use the thread, the tube must be clamped together to the corresponding diameter.
Grinding material, cleaning cloths and cleaning agents can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Ø outside | 10 mm |
Manufacturer | GPO |
Material | Steel |
Area of application | Special tool |
Surface | blue galvanized |
Total length | 400 mm |
Accessories & related products
Moped fans like you also bought:
GPO fork lock | Puch
Ø rotating part: 12 mm · Ø Pin: 8 mm · Ø outside: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Width: 17 mm · Length of turned part: 25.6 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Total length: 40.8 mm
CHF 9.90
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Height: 7 mm · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
CHF 2.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
CHF 2.80
swiing® revival screw M7x35 clamping bridge | Puch
Width across flats SW: 5 mm · Total length: 41.6 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Thread type: M7x1 (standard thread) · Screw head: Cylinder head · Ø External head: 10.5 mm · Drive: Hexagon socket · Shank: No · Thread length: 34.6 mm · Strength class: 8.8
CHF 2.90
GPO steerer tube nut M26x1 closed fork plate chrome
Width across flats SW: 30 mm · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Manufacturer: GPO · Height: 13.8 mm · Area of application: Standard · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Thread depth: 12 mm
CHF 9.90
CHF 12.90