41.0 mm piston with two 1.5 mm rectangular piston rings with internal fuse (IS) to fit your moped / moped with Sachs 50/2, 50/3 and 50/4 engine.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston skirt is shortened by 4 mm on the inlet side.
We recommend installing a piston clearance of 0.06 mm, so the cylinder should have a bore of 40.98 mm.
The piston kit contains piston pins, piston clips and piston rings.
You will find the appropriate installation tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Ø outside piston (A) | 40.92 mm |
| Compression height (C) | 28 mm |
| Curvature (D) | 2.5 mm |
| Total piston height (E) | 52 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 41 mm |
| Piston ring mold | Rectangular ring |
| Ø piston pin (B) | 12 mm |
| Piston ring impact | Internal fuse (IS) |
| Piston ring height | 1.5 mm |
| Piston weight | 91 g |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Area of application: (Dis)assembly tool · Number of components: 7 pcs · Width across flats SW: 10 mm · Width across flats SW: 17 mm
CHF 19.90
Moped fans like you also bought:
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Ø inside: 41 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM number: 0950 128 000
CHF 2.80
Continental 2.25 x 19" whitewall
Manufacturer: Continental · Tire width [inch]: 2.25 " · Color: black and white · Tire width [mm]: 57.15 · Wheel size [inch]: 19 " · Width [inch]: 2 1/4 · Speed index: B = 50 km/h · Load capacity index: 41 = 145 kg · Profile type: KKS 10 · Tire type: Allround · Old designation: 23 x 2.25 · White wall: Yes · Tubeless (yes/no): Tubetype TT (requires hose)
CHF 62.90
Motorex chain spray Off Road 500 ml
Manufacturer: Motorex · Oil type: fully synthetic · Contents [ml]: 500 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Area of application: Cross
CHF 19.90
CHF 39.80/l
GPO piston 40.96 mm | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: GPO · Ø outside piston (A): 40.96 mm · Compression height (C): 28 mm · Curvature (D): 2.5 mm · Total piston height (E): 52 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Piston weight: 90 g
CHF 33.90
Collection only possible with online purchase and appointment.
