40.0 mm replacement piston for your Puch X30 Velux moped / moped and 2- and 3-speed small engine bikes MS, MV, MV50, VSD DS, VZ and MC models with 40 mm cylinder.
The piston kit includes two rectangular piston rings with flank lock (FS).
The piston kit contains piston pins, piston clips and piston rings.
You will find the appropriate assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Ø outside piston (A) | 39.94 mm |
Ø piston pin (B) | 12 mm |
Compression height (C) | 22.5 mm |
Curvature (D) | 3.4 mm |
Total piston height (E) | 52.45 mm |
Number of piston rings (F) | 2 pcs |
Nominal diameter | 40 mm |
Piston ring mold | Rectangular ring |
Piston ring impact | Flank safety device (FS) |
Piston ring height | 2 mm |
Thick piston ring | 1.65 mm |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Nominal diameter: 40 mm · Ø outside piston (A): 39.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm
CHF 34.90
CHF 44.90
Piston 40 mm (10 mm KoBo) | Puch X30 Velux fan-cooled
Nominal diameter: 40 mm · Ø outside piston (A): 39.95 mm · Ø piston pin (B): 10 mm · Compression height (C): 23.6 mm · Curvature (D): 3.4 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm
CHF 47.90
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
CHF 19.90
CHF 29.90
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Color: silver · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
CHF 10.90
CHF 15.90
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
CHF 8.50
CHF 9.90
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Color: black
CHF 19.90
swiing® revival rubber grommet ignition | Puch X30 Z50
Manufacturer: swiing® revival parts · Material: Rubber · Surface: raw · Area of application: Standard · Ø Cable bushing: 2.5 mm · Ø Cable bushing: 5.2 mm · Total length: 19.3 mm · Width: 15.6 mm · Height: 3.5 mm · Total height: 11.3 mm · Color: black
CHF 7.90
CHF 9.90
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 10 pcs · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard
CHF 19.90
GPO light switch with wiring harness base chrome version
Manufacturer: GPO · Material: Plastic · Housing material: Steel · Surface: chrome-plated · Color: Chrome · Substructure material: Steel · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of positions: 3 pcs · Number of cables: 5 pcs · Cable length: 970 mm · Height: 25 mm · Cable bifurcation to motor: 970 mm · Cable bifurcation to lamp: 180 mm · Width: 30 mm · Cable bifurcation to switch: 420 mm · Ø Handlebars: 22 mm · Total length: 50 mm
CHF 16.90