Complete ignition with VEC coil and 6 volt light coil for left-turning two-speed engines on mopeds / mopeds such as Puch X30 Sport, Puch X30 Velux / Sachs 50/2, Sachs 503 or Zündapp Belmondo.
The set includes all parts such as fastening screws, flywheel nut with wedge, ignition plate, ignition and light coil, pole wheel and spark plug connector.
The components are supplied individually and still need to be assembled.
Direction of rotation: Left (counterclockwise)
Operating voltage of the light system: 6 volts
Wattage of the light system: 17 watts
Ø inside flywheel: 90 mm
Attention: A spark plug connector with at least 10 kOhm discharge must be used, the spark plug must not be discharged!
With Beru or MERIT spark plug connectors, misfiring may occur.
Adjusting the ignition:
In principle, nothing needs to be adjusted on the ignition. Only the ignition plate can be turned slightly for a perfect ignition spark, the rest is regulated by the ignition chip.
In the basic setting, the three fastening screws of the ignition plate are located in the middle of the slotted holes. Pre-tensioning is achieved by turning the ignition plate against the direction of motor rotation. Fine adjustment is carried out at medium speed using the strobe light. The electrode gap on the spark plug must be set to 0.7-0.8 mm in advance.
The ignition timing adjustment gun as well as other tools and individual parts for your ignition can be found in the accessories section.
The set includes the following fixed parts:
Manufacturer: GPO · Pony OEM number: A2133, A5532 · Sachs OEM number: 0265 140 005, 0265 206 000
Manufacturer: GPO · Material: Steel · Tension: 6 V · Performance: 17 W · Direction of rotation: left · Ø cone small inside: 11.5 mm · Ø cone large inside: 15 mm · Cone length: 18.5 mm · Cone ratio: 1:5 · Ø Internal flywheel: 91.1 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 8 mm · Weight: 900 g · Height: 36.1 mm · Pony OEM number: A2600 · Sachs OEM number: 0286 175 005
Manufacturer: NGK · Material: Plastic, Rubber · Color: black · Ø cable: 5 mm, 7 mm · Spark plug socket: SAE · Cable available: No · Suppressed: Yes · Resistance: 10000 Ω
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Flange nut · Drive: External hexagon · Thread type: MF10x1 (fine pitch thread) · Ø outside: 18.8 mm · Height: 8.9 mm · Width across flats SW: 14 mm · Pony OEM number: A4513 · Sachs OEM number: 0942 072 102
Material: Steel · Total length: 9.15 mm · Width: 3 mm · Height: 3.7 mm
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Alternative version of the Puch OEM number: 900.3202, 900.1509
Tension: 6 V · Performance: 17 W · Ø Internal flywheel: 90 mm · Height: 25.2 mm · Total length: 76.8 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.1 mm · Hole spacing: 54 mm · Area of application: Standard, Original
Manufacturer: VEC · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5 mm · Cable length: 140 mm, 420 mm · Color: black · Total length: 77 mm · Height: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Area of application: Standard, Original, Performance
Details
| Manufacturer | VEC, GPO |
| Tension | 6 V |
| Direction of rotation | left |
| Performance | 17 W |
| Ø Internal flywheel | 90 mm |
| Ø cable | 5 mm |
| Mounting type | Screws |
| Area of application | Tuning, Standard |
Suitable for the following models
| Puch | ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 535 |
| Zündapp Belmondo |
Accessories & related products
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Strength class: 8.8 · Area of application: (Dis)assembly tool
CHF 9.90
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Ø Internal flywheel: 61.5 mm · Area of application: Tuning · Ø cable: 7 mm · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g
CHF 299.90
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Ø Pin: 8 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Ø outside: 93 mm · Ø inside: 27 mm · Total length: 290 mm · Thickness: 5 mm · Height: 80 mm · Area of application: Special tool · Number of components: 1 pcs
CHF 47.90
swiing® revival ignition set (Bosch / Ducati / swiing)
Manufacturer: swiing® revival parts · Tension: 6 V · Performance: 17 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Ø cable: 5 mm · Number of fixing points: 3 pcs · Area of application: Standard · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
CHF 154.90
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Place of use: Internal (in the ignition) · Manufacturer: VEC · Ø cable holder: 5 mm · Color: black · Mounting type: Screws · Total length: 77 mm · Cable length: 140 mm · Cable length: 420 mm · Ø mounting hole: 4.6 mm · Height: 48 mm · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Number of fixing points: 2 pcs · Hole spacing: 54 mm
CHF 99.90
Not in stock
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing · Tension: 12 V · Performance: 65 W · Direction of rotation: left · Ø mounting plate: 96 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g · Area of application: Tuning
CHF 364.90
GPO ignition set CDI anticlockwise 12 V
Manufacturer: GPO · Material: Aluminum · Tension: 12 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
CHF 211.70
GPO / swiing ignition set, left-hand breaker 6V
Manufacturer: GPO · Manufacturer: swiing · Material: Aluminum · Tension: 6 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
CHF 199.90
Not in stock
Moped fans like you also bought:
Light coil 6V with cable
Tension: 6 V · Performance: 17 W · Ø Internal flywheel: 90 mm · Hole spacing: 54 mm · Total length: 76.8 mm · Mounting type: Screws · Height: 25.2 mm · Number of fixing points: 2 pcs · Ø mounting hole: 4.1 mm · Area of application: Original · Area of application: Standard
CHF 18.90
GPO flywheel 6V / 17W anticlockwise (Version 2.0) | Puch, Sachs, Belmondo
Manufacturer: GPO · Material: Steel · Tension: 6 V · Thread type: MF26x1.5 (fine pitch thread) · Direction of rotation: left · Performance: 17 W · Ø cone small inside: 11.5 mm · Thread length: 8 mm · Ø cone large inside: 15 mm · Cone length: 18.5 mm · Height: 36.1 mm · Ø Internal flywheel: 91.1 mm · Cone ratio: 1:5 · Weight: 900 g · Ø Flywheel outside: 116.5 mm · Pony OEM number: A2600 · Sachs OEM number: 0286 175 005
CHF 87.90
Hot
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Place of use: Internal (in the ignition) · Manufacturer: VEC · Ø cable holder: 5 mm · Color: black · Mounting type: Screws · Total length: 77 mm · Cable length: 140 mm · Cable length: 420 mm · Ø mounting hole: 4.6 mm · Height: 48 mm · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Number of fixing points: 2 pcs · Hole spacing: 54 mm
CHF 99.90
Not in stock
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Thread type: MF10x1 (fine pitch thread) · Nut type: Flange nut · Height: 8.9 mm · Drive: External hexagon · Ø outside: 18.8 mm · Area of application: Standard · Width across flats SW: 14 mm · Pony OEM number: A4513 · Sachs OEM number: 0942 072 102
CHF 2.40
Collection only possible with online purchase and appointment.
