Front light made of black plastic with side tabs for routing the cable harness for Piaggio Si Mix mopeds / mopeds from 1996 onwards.
The control knob on the top has two positions.
The front light can be fitted with both conventional P26s bulbs and P26s LED bulbs (not included).
All common speedometers with a diameter of 48 mm can be installed in the front light.
Ø outside: 135 mm
Hole spacing: 115 mm
Tachometer cut-out: 48 mm
Matching bulbs, lamp grilles and alternative front lights can be found in the accessories.
Original Piaggio spare part number: 228999, 268074
A quality product made in Italy.
Details
| Manufacturer | Made in Italy |
| Test mark | none |
| Housing material | Plastic |
| Bulb holder | P26s |
| Color | white, black |
| Mounting type | Nuts & bolts |
| Ø outside | 135 mm |
| Number of fixing points | 2 pcs |
| Switch included | Yes |
| Battery operated | No |
| Speedometer recording | 48 mm |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: galvanized (blue) · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
CHF 34.90
Hot
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Type of current: Alternating current (AC) · Performance: 50 W · Width: 27 mm · Total length: 50 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
CHF 29.90
Headlight black (2 switch positions) | Piaggio SI FL 2
Manufacturer: Made in Italy · Test mark: none · Housing material: Plastic · Color: black · Color: white · Ø outside: 135 mm · Bulb holder: P26s · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Mounting type: Nuts & bolts
CHF 44.90
Headlight black (3 switch positions) | Piaggio SI FL 2
Manufacturer: Made in Italy · Test mark: none · Housing material: Plastic · Color: black · Color: white · Bulb holder: P26s · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Ø outside: 135 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 44.90
Headlight gray (2 switch positions) | Piaggio SI FL 2
Manufacturer: Made in Italy · Test mark: none · Housing material: Plastic · Color: gray · Color: white · Ø outside: 135 mm · Bulb holder: P26s · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Mounting type: Nuts & bolts
CHF 44.90
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Total length: 145 mm · Color: silver · Height: 5.3 mm · Width: 105 mm · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm
CHF 10.90
swiing® revival 16" front fender primed | Piaggio SI
Manufacturer: swiing® revival parts · Material: Steel · Color: black · Surface: primed · Folding the ends: open folded · Wheel size [inch]: 16 " · Shape of the mudguard: partly round · Total length over ends: 550 mm · Scope: 705 mm · Wide mudguard profile: 90 mm · Height of mudguard profile: 33 mm · Total height from support surface to top edge: 190 mm · Mounting type: Nuts & bolts · Piaggio OEM number: 267651
CHF 34.90
Collection only possible with online purchase and appointment.
