Front light made of black plastic with side tabs for routing the cable harness for Piaggio Si FL 2 mopeds / mopeds.
The control knob on the top has three positions.
The front light can be fitted with both conventional P26s bulbs and P26s LED bulbs (not included).
All common speedometers with a diameter of 48 mm can be installed in the front light.
Ø outside: 135 mm
Hole spacing: 115 mm
Tachometer cut-out: 48 mm
Matching bulbs, lamp grilles and alternative front lights can be found in the accessories.
Original Piaggio spare part number: 228999, 268074
A quality product made in Italy.
Details
Color | white, black |
Manufacturer | Made in Italy |
Ø outside | 135 mm |
Housing material | Plastic |
Speedometer recording | 48 mm |
Bulb holder | P26s |
Mounting type | Nuts & bolts |
Switch included | Yes |
Battery operated | No |
Number of fixing points | 2 pcs |
Suitable for the following models
Piaggio | Si |
Accessories & related products
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Width: 27 mm · Performance: 100 W · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm · Mounting type: Screws
CHF 34.90
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Width: 27 mm · Performance: 50 W · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm · Mounting type: Screws
CHF 29.90
Headlight black (2 switch positions) | Piaggio SI FL 2
Manufacturer: Made in Italy · Housing material: Plastic · Color: black · Color: white · Ø outside: 135 mm · Bulb holder: P26s · Speedometer recording: 48 mm · Battery operated: No · Switch included: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 44.90
Headlight gray (2 switch positions) | Piaggio SI FL 2
Manufacturer: Made in Italy · Housing material: Plastic · Ø outside: 135 mm · Bulb holder: P26s · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Mounting type: Nuts & bolts · Color: gray · Color: white
CHF 44.90
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Height: 5.3 mm · Total length: 145 mm · Color: silver · Ø mounting hole: 5 mm · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
CHF 10.90
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
CHF 9.90
Stand set | Piaggio SI
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
CHF 24.90