Hot 
Special ignition box with two programmable ignition curves for your moped / moped.
The ignition curves can be freely determined on the computer itself. To do this, you need software, which you can find on the HPI homepage (Tune Box) and download free of charge.
For tuning freaks with good technical knowledge.
The ignition box is compatible with all HPI-210 ignitions and is used instead of the usual CDI box.
To make things easier, the switch at the bottom of the accessory can be connected. This makes it easy to switch between the two ignition curves at the touch of a button. We also offer a complete set with all the individual parts you need for programming and use.
Installation:
When using the standard ignition box, the feed rate is set via the flywheel. With the programmable ignition box, however, this is done with the software. For this reason, the rotor must match the marking on the stator at TDC (0° preload). This can be seen in Figure 4.
The corresponding connection cable for the computer and other accessories can be found below in the accessories section.
Branded product from the manufacturer HPI – Horse Power Ignition.
Details
| Manufacturer | HPI |
| Material | Plastic |
| Color | red |
| Total length | 63 mm |
| Ø mounting hole | 7.5 mm |
| Hole spacing | 80 mm |
| Area of application | Performance, Racing, High End, Tuning |
| Width | 100 mm |
| Height | 28 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Performance: 60 W · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Flywheel outside: 71.5 mm · Area of application: Tuning · Ø cable: 7 mm · Ø Internal flywheel: 61.5 mm · Weight: 340 g · Number of fixing points: 6 pcs
CHF 299.90
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Thread type: MF27x1 LH (fine/left-hand thread)
CHF 95.90
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Surface: anodized · Color: black · Tension: 12 V · Ø outside: 90 mm · Ø inside: 27.5 mm · Performance: 60 W · Number of cables: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Cable length: 640 mm · Number of fixing points: 6 pcs · Ø bolt circle: 80 mm
CHF 149.90
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
CHF 374.90
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.75
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Surface: blank · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Total length: 19 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
CHF 2.50
swiing® revival screw M7x35 clamping bridge | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Width across flats SW: 5 mm · Total length: 41.6 mm · Drive: Hexagon socket · Screw head: Cylinder head · Area of application: Standard · Ø External head: 10.5 mm · Shank: No · Thread type: M7x1 (standard thread) · Strength class: 8.8 · Thread length: 34.6 mm
CHF 2.90
NGK B5ES spark plug long thread
Manufacturer: NGK · Candle designation: B5ES · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Width across flats SW: 21 mm · Suppressed: No · Area of application: Original · Area of application: Standard · Thread type: MF14x1.25 (fine pitch thread)
CHF 6.50
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Ø outside: 117 mm · Ø inside: 71.8 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 1.8 mm · Weight: 100 g · Number of fixing points: 4 pcs · Ø bolt circle: 101 mm · Ø mounting hole: 5 mm
CHF 19.90
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Ø inside: 39 mm · Height: 13.5 mm · Weight: 87 g · Number of fixing points: 10 pcs · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 6 mm
CHF 62.40
Collection only possible with online purchase and appointment.
