Rotor for HPI 210 ignition with light coil.
The cone is suitable for all Bosch and Ducati ignitions which were installed on mopeds and mopeds such as Puch, Sachs 50/2 & 503, Zündapp Belmondo, Pony Beta with Minarelli engine etc..
Ø outer: 71.5 mm
Ø cone small: 10.9 mm
Ø cone large: 15.8 mm
Length cone: 28 mm
Branded product of the manufacturer HPI – Horse Power Ignition.
Details
| Manufacturer | HPI |
| Material | Steel |
| Thread type | MF27x1 LH (fine/left-hand thread) |
| Direction of rotation | left, right |
| Ø cone small inside | 10.9 mm |
| Ø cone large inside | 15.8 mm |
| Cone length | 28 mm |
| Cone ratio | 1:5 |
| Ø Flywheel outside | 71.5 mm |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta 521 (Motor) |
| Zündapp Belmondo | |
| DKW | |
| Hercules | |
| Kreidler | Flory MF Florett |
| Zündapp | 434 Fahrgestell (Bergsteiger) 247 Motor 278 Motor |
| KTM | |
| Rixe |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Ø Internal flywheel: 61.5 mm · Area of application: Tuning · Ø cable: 7 mm · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g
CHF 299.90
HPI stator ignition
Manufacturer: HPI · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: anodized · Tension: 12 V · Ø outside: 90 mm · Material: Aluminum · Performance: 60 W · Color: black · Number of cables: 4 pcs · Cable length: 640 mm · Ø inside: 27.5 mm · Number of fixing points: 6 pcs · Ø bolt circle: 80 mm
CHF 149.90
swiing® ingenious 280 g additional weight HPI Inox
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 300 g · Ø inside: 39 mm · Ø outside: 95 mm · Ø bolt circle: 50 mm · Ø bolt circle: 55 mm · Thickness: 12.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 7 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10 mm
CHF 49.90
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 250 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 25.80
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 100 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Ø mounting hole: 5 mm · Thickness: 1.8 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs
CHF 19.90
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Color: red · Height: 28 mm · Total length: 63 mm · Number of fixing points: 2 pcs · Width: 100 mm · Ø mounting hole: 7.5 mm · Hole spacing: 80 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 307.40
Moped fans like you also bought:
Clutch 3-jaw (aluminum) | Puch E50
Thickness: 20.9 mm · Material: Aluminum · Material: Steel · Material addition: Composite materials · Area of application: Original · Area of application: Standard · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm
CHF 49.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs · Ø outside: 5 mm
CHF 2.00
Handlebar fork plate 40 cm curved with chrome strut
Surface: chrome-plated · Manufacturer: Made in Germany · Material: Steel · Clamping diameter: 22 mm · Color: Chrome · Fork plate holder length: 100 mm · Ø outside: 22 mm · Width: 730 mm · Height: 400 mm · Length handlebar ends: 150 mm · Mounting type: Fork plate · Crossbar: Yes
CHF 34.90
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 9.90
HPI stator ignition
Manufacturer: HPI · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: anodized · Tension: 12 V · Ø outside: 90 mm · Material: Aluminum · Performance: 60 W · Color: black · Number of cables: 4 pcs · Cable length: 640 mm · Ø inside: 27.5 mm · Number of fixing points: 6 pcs · Ø bolt circle: 80 mm
CHF 149.90
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g
CHF 62.40
Collection only possible with online purchase and appointment.
