38.50 mm piston with a 1.5 mm rectangular piston ring with flank lock (FS) for Puch Supermaxi LG1 & LG2 mopeds / mopeds with catalytic converter.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their dimensions and locking types on the legend in the images.
The piston kit with the first dimension is used for bored and honed cylinders.
The piston kit contains piston pin, piston clips and piston ring.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer Meteor.
Details
Manufacturer | Meteor |
Ø outside piston (A) | 38.5 mm |
Ø piston pin (B) | 12 mm |
Compression height (C) | 24 mm |
Curvature (D) | 2.3 mm |
Total piston height (E) | 55.3 mm |
Number of piston rings (F) | 1 pcs |
Piston ring mold | Rectangular ring |
Nominal diameter | 38.5 mm |
Piston ring impact | Flank safety device (FS) |
Piston ring height | 1.5 mm |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) |
Accessories & related products
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Total length: 12 mm · Ø outside: 2.6 mm · Ø outside: 4 mm · Manufacturer: swiing® revival parts · Width: 3.3 mm · Material: Aluminum · Material: Rubber · Surface: blank · Color: black · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Alternative version of the Pony Spare part no.: A4595A · Alternative version of Sachs spare part no.: Bing 47-032
CHF 6.90
Clutch 3-jaw (aluminum) | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm
CHF 49.90
Main stand black | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
CHF 19.90
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø inside: 9 mm · Total length: 122 mm · Ø outside: 14 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blue galvanized
CHF 2.70
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing outlet: 42 mm
CHF 9.90
Not in stock
Oil filler plug with sealing ring | Puch Maxi
Total length: 14.6 mm · Material: Steel · Surface: blue galvanized · Number of components: 2 pcs · Thread type: M10x1.5 (standard thread) · Screw head: Lens head · Ø External head: 14 mm · Drive: Slot · Thread length: 6 mm · Puch spare part no.: 364.1.10.660.1
CHF 3.50