39.0 mm piston with a 1.5 mm rectangular piston ring with internal fuse (IS) suitable for Zündapp ZX25 / ZA25 / ZA40 / ZL25 / ZS25 / ZE40 / X25 / A25 mopeds, which have a Zündapp engine type 460 installed.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
Tolerance type: D
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Original Zündapp spare part number: 250 02 711 040
Quality product from the Italian manufacturer Meteor.
Details
Manufacturer | Meteor |
Nominal diameter | 39 mm |
Ø outside piston (A) | 38.98 mm |
Ø piston pin (B) | 12 mm |
Compression height (C) | 26 mm |
Curvature (D) | 1.5 mm |
Total piston height (E) | 51.5 mm |
Number of piston rings (F) | 1 pcs |
Piston ring mold | Rectangular ring |
Piston ring impact | Internal fuse (IS) |
Piston ring height | 1.5 mm |
Tolerance group | D |
Suitable for the following models
Zündapp |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Width across flats SW: 10 mm · Width across flats SW: 17 mm · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs
CHF 19.90
CHF 29.90
Moped fans like you also bought:
Oil seal NBR 17/40/7 A DUO | Puch E50
Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 40 mm · Manufacturer: Puch · Width: 7 mm · Material: NBR · Area of application: Standard · Surface: rubberized · Temperature resistance (min.): -30 - 100 °C
CHF 5.10
NTN 6203 Ball bearing 17/40/12
Bearing type: Deep groove ball bearing · Stock number: 6203 · Ø inside: 17 mm · Inner ring width: 12 mm · Ø outside: 40 mm · Manufacturer: NTN · Ball bearing closed: No · Width: 12 mm · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Material: Steel · Surface: blank
CHF 6.50
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Number of fixing points: 6 pcs · Total length: 200 mm · Manufacturer: swiing® revival parts · Width: 130 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.35 mm · Pony spare part no.: A1888 · Sachs spare part no.: 0250 150 000
CHF 5.40