40 mm piston with two 2 mm rectangular piston rings with flank lock (FS) to fit your Sachs 502, 50/2, 503 2AL, AAL, 2BL, ABL CH moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the piston rings used, their stems and locking types on the legend in the pictures.
This special piston has a molybdenum coating. In combination with oil, this results in technologically advanced wear protection with outstanding sliding properties.
Commonly used for cylinders subject to heavy loads.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer Meteor.
Details
| Manufacturer | Meteor Racing |
| Surface | molybdenum-coated |
| Ø outside piston (A) | 39.95 mm |
| Ø piston pin (B) | 12 mm |
| Compression height (C) | 28 mm |
| Curvature (D) | 3 mm |
| Total piston height (E) | 53 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 40 mm |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 2 mm |
| Piston weight | 94 g |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Number of components: 7 pcs · Area of application: (Dis)assembly tool
CHF 19.90
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Ø inside: 17.2 mm · Manufacturer: BING · Ø outside: 20 mm · Material: Rubber · Number of components: 1 pcs · Area of application: Standard · Surface: raw · Cord thickness: 1.4 mm · Place of use: Carburetor · Color: black · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
CHF 2.90
swiing® revival needle roller bearing 12/15/14.2 original
Bearing type: Needle sleeve · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage · Ø outside: 15 mm · Ø inside: 12 mm · Width: 14.2 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 155 001
CHF 8.90
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Ø inside: 64 mm · Height: 16 mm · Thread length: 40 mm · Ø outside: 75 mm · Thread type: M6x1 (standard thread) · Area of application: Special tool · Number of components: 4 pcs · Sachs OEM no.: 0276 057 000
CHF 29.90
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Nominal diameter inside: 8.5 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Ø inside: 8.3 mm · Ø outside: 21.95 mm · Ø Bundle: 26 mm · Total length: 13 mm · Alternative version of the Pony OEM number: A4286 · Alternative version of the Sachs OEM number: 0251 121 000
CHF 23.90
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Material: Steel · Bearing type: Deep groove ball bearing · Width: 8 mm · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 15 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Ø outside: 35 mm · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
CHF 49.90
Collection only possible with online purchase and appointment.
