This color set is a remix of the blue-transparent paint used by Puch. (Original item no. 900.0267 / 08).
The blue glaze corresponds 100% to the original color.
The set contains 400 ml silver base (reproduced using the original sample) and 400 ml blue transparent P5051T, the mixing ratio of the glaze is 1:0.7 with two-coat thinner, results in 0.68l ready to spray.
The mixing ratio for the silver primer is 1:1, which results in 0.8 l.
Two-coat thinner (BC thinner / basecoat thinner) must be used.
After the moped parts have been prepared as usual, they are painted with the silver primer to cover them. After a flash-off time of approx. 30 minutes, two even coats of the blue glaze are applied. As the amount of glaze applied can change the color tone, it is recommended to create a color sample in advance and then paint the moped using the same system!
Painting with 2-component clearcoat after a drying time of another 30 minutes is mandatory. However, this is not included in the set.
The set includes the following fixed parts:
Details
Manufacturer | Puch |
Contents [ml] | 800 ml |
Color | blue |
Suitable for the following models
Puch |
Accessories & related products
Moped fans like you also bought:
swiing® revival 17" front fender round Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 570 mm · Scope: 715 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 185 mm · Mounting type: Nuts & bolts
CHF 34.90
Seat bench "Puch" logo black
Width: 130 mm · Width: 210 mm · Manufacturer: Made in Portugal · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Surface: perforated · Surface: powder-coated · Spring-loaded: No · Lettering: Yes · Color: black · Number of fixing points: 1 pcs · Height: 110 mm · Total length: 300 mm
CHF 54.90
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Diameter: 6 mm · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Total length: 27.3 mm · Thread length: 9.5 mm · Thread length: 14 mm · Width across flats SW: 8 mm · Strength class: 10 · Strength class: 12.9 · Drive: External hexagon
CHF 19.20
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Diameter: 6 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Width across flats SW: 10 mm · Total length: 30 mm · Thread length: 12 mm · Strength class: 8 · Strength class: 10.9
CHF 10.60
Jamarcol exhaust 22 mm 2-piece replica (with number & logo) | Puch
Manufacturer: Jamarcol · Material: Steel · Surface: chrome-plated · Ø outside: 59 mm · Total length: 920 mm · Color: Chrome · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
CHF 99.90