Single piston ring suitable for the 47 mm racing kit for Fantic Issimo & Yamaha Yamy mopeds with a Minarelli V1 engine.
Two pieces are required per piston.
You can find the matching cylinder kit in the accessories section.
Width of piston ring: 1.5 mm
Quality product from the Italian manufacturer Polini.
Details
| Nominal diameter | 47 mm |
| Manufacturer | Polini |
| Area of application | Racing |
| Height | 1.5 mm |
Suitable for the following models
| Fantic | Issimo |
| Yamaha |
Accessories & related products
Polini 47 mm cylinder kit | Minarelli V1
Nominal diameter: 47 mm · Manufacturer: Polini · Material: Gray cast iron · Surface: varnished · Displacement: 75 ccm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 18.3 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 38.5 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 38 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 46 x 46 · Decompressor: none · Camouflaged: No · Area of application: Tuning
CHF 209.90
MLM 18 mm intake manifold Dell'Orto PHBG | Minarelli V1
Manufacturer: MLM · Material: Steel · Surface: varnished · Color: black · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Ø inside: 18 mm · Mounting type: Screws · Hole spacing inlet: 40 mm · Area of application: Tuning
CHF 69.90
Moped fans like you also bought:
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm
CHF 2.40
Plastic license plate holder
Total length: 175 mm · Width: 108 mm · Height: 11 mm · Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Number of fixing points: 9 pcs · Hole spacing: 50 mm · Thread length: 6 mm · Mounting type: Nuts & bolts · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 6 mm
CHF 7.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm
CHF 2.00
Dell'Orto 21 mm PHBG CS carburetor hand choke
Total length: 82 mm · Width: 72 mm · Height: 125 mm · Manufacturer: Dell'Orto · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: PHBG AS · Choke control: Hand choke · Nominal diameter: 21 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke nozzle size: 60 · Nozzle block: 262AU · Camouflaged: No · Nozzle size: 92 · Size of secondary nozzle: 50
CHF 119.90
Collection only possible with online purchase and appointment.
