Grey side covers for your Piaggio Ciao moped / moped with mono drive.
These covers come very close to the original covers in color and shape. Only the gloss level is slightly higher and the cut-out for the fuel tap is slightly larger.
As these frame covers are designed for the PX and C24 models, it is possible that the middle side protection screw on the right-hand side of your old P or SC frame may not fit.
Note: The side covers sometimes have tolerances from production and do not fit perfectly on every frame.
You can find the matching side guard fastening screws and other attachment parts for your Ciao in the accessories.
Original Piaggio spare part number: 813828/813827
A quality product made in Italy.
Details
Manufacturer | Made in Italy |
Total length | 740 mm |
Width | 55 mm |
Height | 270 mm |
Material | Plastic |
Color | gray |
Number of fixing points | 6 pcs |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao |
Accessories & related products
Malossi tuning set 43 mm (version 2.0) | Piaggio Ciao, Bravo, Boxer
Manufacturer: Dell'Orto · Manufacturer: Malossi · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Camouflaged: No · Area of application: Tuning · Displacement: 65 ccm · Nominal diameter: 65 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm
CHF 357.80
Side protectors gray mono (1A quality) | Piaggio Ciao P, SC
Number of fixing points: 6 pcs · Total length: 750 mm · Manufacturer: Made in Italy · Material: Plastic · Color: gray · Piaggio spare part no.: 103233 · Piaggio spare part no.: 103234 · Alternative version of Piaggio spare part no.: 231904 · Alternative version of Piaggio spare part no.: 231906 · Alternative version of Piaggio spare part no.: 813827 · Alternative version of Piaggio spare part no.: 813828
CHF 89.90
Moped fans like you also bought:
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Area of application: Standard · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm
CHF 19.90
Meteor piston 38 mm #1 | Puch
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.7 mm · Curvature (D): 3.3 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Tolerance group: 1 · Puch spare part no.: 349.1.10.106.0/21
CHF 49.90
BOSCH Breaker with cable | Bosch / Ducati
Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Manufacturer: BOSCH · Area of application: Original · Area of application: Standard · Material: Steel · Cable available: Yes · Ø axle: 4 mm · Cable length: 100 mm · Ø Internal flywheel: 90 mm · Alternative version of the Pony Spare part no.: A4606 · Alternative version of the Pony Spare part no.: A4606A · Pony spare part no.: A4607 · Sachs spare part no.: 0283 116 102 · Alternative version of Sachs spare part no.: 0983 106 000 · Alternative version of Sachs spare part no.: 2783 039 001 · BOSCH spare part no.: 1 217 013 025 · BERU spare part no.: 0 340 100 710
CHF 18.90
CHF 22.90