A absolute market novelty: the legendary 13 mm Bing SSB carburetor with square intake is now exclusively available from us.
The replica carburetor is perfectly modeled on the original and is an absolute must if you want to tease out the last horsepower from your Sachs moped, moped and small motorcycle of the 502, 50/2, 50/3, 50/4 series.
These engines were installed on the following models, among others: Alpa, Caravelle, Comet, DKW, Eiger, Göricke, Hercules, Prior, Pony Junior, Rico, Rixe, Walco etc.
The square intake flange with 13 x 13 mm öffnung corresponds to an area of a round 15 mm tuning carburetor.
Installed nozzle size: 76
The long air filter cap is installed. If the carburetor is installed on a diaphragm cylinder or 4-speed engine, the short air filter cap should be used.
Matching add-on parts such as cylinders, air filters, nozzle sets, adjusting nozzles etc. can be found in the accessories section.
Made by the quality brand swiing – swiss ingenious.
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
swiing nozzle set (58 - 68) Bing SSB | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SSB · Drive: External hexagon · Nozzle type: Main nozzle · Width across flats SW: 8 mm · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68
CHF 37.90
swiing nozzle set (70 - 80) Bing SSB | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SSB · Nozzle type: Main nozzle · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Drive: External hexagon · Width across flats SW: 8 mm
CHF 37.90
swiing 38 mm cylinder kit Racing fan-cooled | Sachs 50/2 (CH)
Manufacturer: swiing · Camouflaged: No · Displacement: 50 ccm · Material: Cast aluminum · Crankshaft stroke: 42 mm · Surface: sandblasted · Nominal diameter: 38 mm · Hole spacing inlet: 31 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 60 x 40 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Area of application: Racing
CHF 219.90
swiing® ingenious 41 mm cylinder kit Racing (Version 2.0) fan-cooled | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Cast aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: No · Area of application: Racing
CHF 219.90
swiing 38 mm cylinder kit Racing fan-cooled | Sachs 50/2, 50/3, 50/4 (DE)
Nominal diameter: 38 mm · Manufacturer: swiing · Material: Cast aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Racing
CHF 219.90
swiing 41 mm cylinder kit Racing fan-cooled (Version 2.0) | Sachs 50/2, 50/3, 50/4 (DE)
Material: Cast aluminum · Thread outlet: M35x2 (standard thread) · Thread inlet: M5x0.8 (standard thread) · Camouflaged: No · Area of application: Racing · Outlet type: Union nut · Surface: sandblasted · Manufacturer: swiing · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole spacing inlet: 31 mm · Nominal diameter: 41 mm · Crankshaft stroke: 42 mm · Hole pattern [mm]: 51 x 40 · Displacement: 55 ccm
CHF 219.90
Moped fans like you also bought:
swiing® revival exhaust nut M35x2 galvanized | Sachs 50/2 (A1507)
Ø inside: 30 mm · Manufacturer: swiing® revival parts · Ø outside: 43 mm · Material: Steel · Surface: blue galvanized · Nut type: Union nut · Thread type: M35x2 (standard thread) · Pony spare part no.: A1507 · Sachs spare part no.: 0242 048 101
CHF 14.90
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Total length: 23 mm · Area of application: Standard · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Diameter: 4.9 mm · Thread length: 6 mm · Thread length: 12 mm · Pony spare part no.: A3700 · Sachs spare part no.: 0640 016 101 · Sachs spare part no.: 0640 016 102
CHF 1.80
swiing® ingenious intermediate flange 13 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Number of fixing points: 4 pcs · Ø inside: 13 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Standard · Area of application: Tuning · Surface: anodized · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Hole spacing: 31 mm · Hole spacing: 67 mm · Mounting type: Screws
CHF 59.90
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 40 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Ø piston pin (B): 12 mm
CHF 39.90
swiing® ingenious cylinder head 41 mm tuning | Sachs 50/2, 50/3, 50/4
Material: Aluminum · Decompressor: M10x1.5 · Area of application: Standard · Candle thread: long · Surface: sandblasted · Manufacturer: swiing® ingenious parts · Number of fixing points: 4 pcs · Ø screw holder: 19 mm · Hole pattern [mm]: 37 x 37 · Ø cylinder: 41 mm · Height: 50 mm · Width: 95 mm · Ø outside: 98 mm · Total length: 127 mm
CHF 68.40
Hot 
swiing® revival flame tube 28 mm chrome | Sachs 50/2, 50/3
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Ø inside: 25.7 mm · Total length: 368 mm · Color: Chrome · Ø outside: 28 mm · Mounting type: Union nut · Ø External connection: 32.25 mm · Sachs spare part no.: P5005
CHF 44.90
Collection only possible with online purchase and appointment.
