Camouflaged 17 mm tuning intake bend suitable for Puch Maxi mopeds / mopeds which have an E50 engine installed.
The intake bend has been specially developed for use with the swiing ingenious 17 mm SRF carburetor with Ø 23 mm connection. In addition, the Puch logo and the 12 have been cast into the outside for optimum camouflage like the original.
With this combination, you get the full potential out of your engine and are still perfectly camouflaged from the outside.
Ø inside: 17 mm
Ø connection: 23 mm
Height (flange - center bore): 42 mm
Total height: 53.5 mm
Hole spacing: 38 mm
To ensure that the air filter fits perfectly on the frame, it is imperative that the 3 mm inlet gasket is used.
You can find the right carburetor, air filter, gasket and a complete set for your Maxi in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® ingenious parts |
Ø inside | 17 mm |
Material | Aluminum |
Total length | 38 mm |
Mounting type | Stud bolts & nuts |
Hole spacing inlet | 38 mm |
Total height | 53.5 mm |
Height flange center hole | 42 mm |
Ø External connection | 23 mm |
Area of application | Tuning, Racing, Performance |
Number of fixing points | 2 pcs |
Camouflaged | Yes |
Suitable for the following models
Puch | E50 |
Accessories & related products
swiing 15 mm carburetor set camouflaged | Puch E50
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Area of application: Tuning · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 104.90
swiing® revival nozzle M3.5 (41 - 120 of your choice) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100
CHF 3.90
GPO air filter | Puch Supermaxi LG1, LG2 Cat
Manufacturer: GPO · Material: Plastic · Color: black · Filter type: Foam · Filter type: Racing screen · Filter type: Standard sieve · Ø Internal connection: 28 mm · Mounting type: Plug connection clamped · Camouflaged: Yes · Area of application: Standard · Area of application: Tuning
CHF 24.90
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Width: 47 mm · Vacuum connection: No · Total length: 65 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Height: 89 mm · Height: 109 mm · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Total length: 64.8 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Height: 89 mm · Height: 110 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Width: 47 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Mounting type: Plug connection clamped · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m
CHF 119.90
Moped fans like you also bought:
swiing nozzle set M3.5 (76 - 86) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86
CHF 15.90
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Width: 47 mm · Vacuum connection: No · Total length: 65 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Height: 89 mm · Height: 109 mm · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90