Cylinder cover with 39 mm combustion chamber diameter for blown cylinders of Puch X30 Velux mopeds, mopeds and small motorcycles.
Attention: For use on ZA50 engines with M6 stud bolts, we recommend the alternative product with smaller stud bolt holes, which you can find in the accessories section.
A good reproduction product of the original CH model with small cooling fins, which is cooled by a fan wheel (fan).
This cylinder head does not have a mount for fitting a decompressor.
Dimension (Ø×H): 90 × 3.5 cm
Ø Stud bolt length: 7.4 mm
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 320.2.10.001.1
Details
Manufacturer | swiing® revival parts |
Ø cylinder | 38 mm |
Number of fixing points | 4 pcs |
Ø outside | 90 mm |
Ø screw holder | 7.4 mm |
Decompressor | No |
Suitable for the following models
Puch | Z50 (X30 Velux) |
Accessories & related products
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Material: Aluminum · Ø outside: 90 mm · Ø cylinder: 38 mm · Height: 35 mm · Area of application: Standard · Ø screw holder: 6.4 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 39.90
Moped fans like you also bought:
swiing® revival rubber grommet ignition | Puch X30 Z50
Manufacturer: swiing® revival parts · Material: Rubber · Color: black · Surface: raw · Width: 15.6 mm · Total length: 19.3 mm · Ø Cable bushing: 2.5 mm · Ø Cable bushing: 5.2 mm · Height: 3.5 mm · Area of application: Standard · Total height: 11.3 mm
CHF 7.90
Fortune 2.25 x 17" tires 2 P.R. Allround
Manufacturer: Fortune · Tire width [inch]: 2.25 " · Tire width [mm]: 57.15 · Width [inch]: 2 1/4 · Wheel size [inch]: 17 " · Old designation: 21 x 2.25 · Speed index: N = 140 km/h · Load capacity index: 35 = 121 kg · Profile type: 2 P.R. · Tire type: Allround · Color: black · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
CHF 25.50
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Ø outside piston (A): 39.94 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 40 mm · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Piston weight: 89 g
CHF 34.90
WEKEM 2K liquid metal
Temperature resistance (min.): -20 - 80 °C · Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Color: gray · Contents [ml]: 24 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Type of application: 2K · Alignment time: 240 sec
CHF 19.90
CHF 398.00/kg
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Area of application: Standard · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Decompressor: Yes
CHF 8.90
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.95 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Piston weight: 74 g
CHF 39.90
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Width across flats SW: 10 mm · Total length: 30 mm · Drive: External hexagon · Diameter: 6 mm · Thread type: M6x1 (standard thread) · Strength class: 8 · Strength class: 10.9 · Thread length: 12 mm
CHF 10.60