Complete screw set for the frame of your Piaggio Ciao P or SC moped / moped.
The P is the old model with a square, unsprung seat post and rear light on the mudguard. The SC can be recognized by the sprung, round seat post and the rear light on the mudguard.
The screw set consists of galvanized steel screws.
A detailed list with the affiliation of the corresponding screws is included.
The following areas are covered:nd coil
Note: As the screw set is designed for two different model series, individual screws are not required and will remain.
Parts such as spacers for the mudguard, the luggage rack or clamping plates for the saddle can be found under accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | blue galvanized |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao |
Accessories & related products
swiing® revival screw set fan cover galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Number of components: 8 pcs · Drive: Cross recess · Screw head: Panhead · Area of application: Standard
CHF 4.90
Moped fans like you also bought:
swiing® revival snap ring low control bearing set (version 2.0)
Nominal diameter: 20 mm · Nominal diameter: 28 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Height: 7 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
CHF 2.50
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Ø outside: 5 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
CHF 2.00
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Material: Steel · Surface: blue galvanized · Thread type: M7x1 (standard thread) · Number of components: 6 pcs · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 11 mm · Ø outside: 11 mm · Total length: 25 mm · Thread length: 19.5 mm · Area of application: Standard
CHF 3.90
GPO control bearing set | Piaggio Ciao
Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Bearing type: Bearing ring · Thread type: FG25.4 (1" 24G) · Color: silver · Ø mounting frame: 30.05 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Height: 10.5 mm · Height: 17 mm
CHF 18.90
swiing® revival cable set cut gray old model | Piaggio Ciao P, SC
Manufacturer: swiing® revival parts · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 840 mm · Outer shell length: 1050 mm · Outer shell length: 1070 mm · Outer shell length: 1150 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Total length: 890 mm · Total length: 1560 mm · Total length: 1650 mm · Total length: 2000 mm · Color: gray
CHF 22.90
Collection only possible with online purchase and appointment.
