Socket axle M12x195 made of blackened steel for the cast rear wheel on your Puch moped / moped.
The brünated surface does not provide permanent rust protection and should therefore be treated with rust inhibitor.
The complete rear axle set is also equipped with the following parts:
- 2 pieces of M12 x 1 nuts
- 1 piece of spacer ring (Ø 20 x 10 mm)
- 1 piece of spacer sleeve (Ø 17 x 11.5 mm)
- 1 piece of spacer (Ø 17 x 15.6 mm)
- 1 piece of spacer (Ø 17 x 67.8 mm)
The spacers in this complete set may need to be adjusted.
A wheel axle of better quality can be found in the accessories section.
Good quality reproduction product from the Asian market.
Details
| Manufacturer | Quenching |
| Material | Steel |
| Surface | burnished, galvanized (blue) |
| Ø shaft | 12 mm |
| Shank length | 137 mm |
| Ø outside | 17 mm, 20 mm |
| Total length | 195 mm |
| Width across flats SW | 19 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Thread length | 25 mm, 28 mm |
Suitable for the following models
| Puch |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Height: 10 mm · Thread type: MF26x1 (fine pitch thread) · Thread depth: 10 mm · Width across flats SW: 19 mm · Strength class: 8
CHF 2.00
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Total length: 185 mm · Width across flats SW: 19 mm
CHF 14.90
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
CHF 21.90
CHF 2’190.00/l
66HEROES cap nut M12x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (stainless steel) · Surface: polished · Nut type: Cap nut · Thread type: MF12x1 (fine pitch thread) · Drive: External hexagon · Height: 26.2 mm · Thread depth: 23.4 mm · Width across flats SW: 17 mm
CHF 11.90
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Screw head: Hexagon · Thread length: 7 mm · Ø Bundle: 6 mm · Total length: 15 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Drive: Slot · Width across flats SW: 7 mm · Area of application: Standard
CHF 2.50
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Surface: blank · Ø inside: 12 mm · Bearing type: Deep groove ball bearing · Ø outside: 28 mm · Material: Plastic · Material: Steel · Width: 8 mm · Stock number: 6001 · Ball bearing closed: Yes · Area of application: Standard
CHF 5.90
Wheel axle set M12x1 x 165 mm front
Manufacturer: Quenching · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Ø shaft: 11.9 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Thread length: 25 mm · Thread length: 26 mm · Height: 9.9 mm · Shank length: 114 mm · Width across flats SW: 19 mm
CHF 14.70
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Total length: 185 mm · Width across flats SW: 19 mm
CHF 14.90
Collection only possible with online purchase and appointment.
