Primpression and adjustment stand for the engines of your Piaggio Ciao, Si, Bravo or Boxer mopeds / mopeds.
Made from 2 mm thick sheet steel, the engine support has been designed to allow quick and easy fixing of the engine. Tuning work on the carburetor or a functional check of the ignition are made considerably easier by the engine mount. In addition, all commercially available exhausts can be fitted, for example to measure the sound level.
The base plate is fitted with silent blocks to ensure safe and low-vibration operation. Fuel is supplied through a 250 ml tank, which is equipped with a fuel tap.
Dimensions assembled: 55 x 22 x 55 cm (L x W x H)
Base plate dimensions: 40 x 22 cm
Tank capacity: 2.5 dl
The engine mount is supplied with all the necessary screws.
You can find other essential tools such as an engine stand for assembly in the accessories section.
A quality product made in Germany.
Details
| Total length | 550 mm |
| Manufacturer | Made in Germany |
| Width | 220 mm |
| Height | 550 mm |
| Material | Steel, Plastic |
| Surface | blue galvanized |
| Material thickness | 2 mm |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
GPO bearing puller inside set
Total length: 140 mm · Span: 8 mm · Span: 25 mm · Manufacturer: GPO · Clamping depth: 10 mm · Clamping depth: 20 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 11 pcs · Width across flats Screw: 14 mm
CHF 169.90
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Total length: 100 mm · Diameter: 12 mm · Diameter: 24 mm · Manufacturer: swiing® ingenious parts · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: blue galvanized · Number of components: 2 pcs · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats Screw: 19 mm
CHF 17.90
Moped fans like you also bought:
Speedometer drive 11 mm axle left with grease nipple mount | Tomos
Ø mounting hole: 11.2 mm · Ø outside: 42 mm · Material: Aluminum · Wheel size [inch]: 16 " · Color: gray · Thread type: MF10x1 (fine pitch thread) · Ø axle: 11 mm · 4-edge speedometer cable: 1.9 mm · Place of use: left · Overall width outside: 48 mm · Total height: 52 mm
CHF 21.90
CEAB ignition coil external red | Piaggio Ciao P, SC (1967 - 1971)
Number of fixing points: 2 pcs · Manufacturer: CEAB · Area of application: Original · Area of application: Standard · Color: red · Place of use: External (outside the ignition) · Mounting type: Screws · Piaggio spare part no.: 114457
CHF 79.80
Headlight black (3 switch positions) | Piaggio SI FL 2
Number of fixing points: 2 pcs · Ø outside: 135 mm · Manufacturer: Made in Italy · Housing material: Plastic · Color: black · Color: white · Bulb holder: P26s · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Mounting type: Nuts & bolts
CHF 44.90
Not in stock
TECNO City Power exhaust Ø 25 mm | Piaggio Ciao, Bravo
Total length: 580 mm · Manufacturer: TECNO · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 70 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Ø Internal connection: 22.5 mm · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped
CHF 38.40
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Area of application: Chemistry · Contents [ml]: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -60 - 300 °C · Gap dimension (max.): 2 mm
CHF 22.90
CHF 327.14/l
GPO license plate holder Inox black
Number of fixing points: 6 pcs · Total length: 147 mm · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Height: 6 mm · Material: Chrome steel (stainless steel) · Surface: varnished · Color: black-matt · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts
CHF 12.90
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Contents [ml]: 70 ml · Color: black · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm
CHF 19.90
CHF 284.29/l
Collection only possible with online purchase and appointment.
