Three-arm cylinder and barrel hone. The honing finger can be clamped in standard drill chucks. By pressing the three arms together, the diameter is reduced and the tool can be plunged into the workpiece to be honed. Thanks to the joints, the tool automatically adjusts to the surface to be machined.
However, if there are seizure marks, heavy scoring or traces of corrosion on the cylinder wall, the cylinder should be drilled out to the nearest dimension.
Application range: Ø 30 - 90 mm
Honing stones length: 50 mm (3 pcs.)
Total length: 220 mm
Weight: 110 gr.
Drive shaft: Hexagon 1/4" 6.3 mm
We recommend using the tool with a Ölspray rather than dry. You can find the appropriate spray in the accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Drive shank Drill chuck | hexagonal |
| Brush head length | 50 mm |
| Manufacturer | GPO |
| Material | Steel, Silicon carbide |
| Surface | blank |
| Diameter | 32 - 90 mm |
| Total length | 220 mm |
| Area of application | Workshop accessories |
| Number of components | 1 pcs |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
CHF 19.90
CHF 29.90
SONAX multifunctional oil 400 ml
Manufacturer: SONAX · Oil type: fully synthetic · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health
CHF 10.90
CHF 27.25/l
Moped fans like you also bought:
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Color: black
CHF 19.90
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Area of application: Standard
CHF 2.80
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Area of application: Standard
CHF 2.40
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch spare part no.: 900.1216 · Puch spare part no.: 901.1308
CHF 9.90
Collection only possible with online purchase and appointment.
