Clutch shoes for the 3-jaw HK clutch with aramid linings (also known under the famous brand name Kevlar®), suitable for your Puch Maxi S / N, Puch Supermaxi LG1 moped / moped which have an E50 input engine with HK roll-on or kickstarter clutch installed.
The centrifugal shoes are covered with a special aramid fiber compound that can withstand even the highest loads.
Note: Only suitable for HK tuning clutches, not suitable for normal E50 centrifugal clutches, as the holes for the springs are drilled larger.
A set consisting of 3 carrier arms.
Other parts such as the complete clutch or the clutch shoes can be found in the accessories section.
Quality product from the Dutch manufacturer HK Clutches.
Details
| Manufacturer | HK Clutches |
| Material | Aluminum |
| Material addition | Aramid (known as Kevlar®) |
| Area of application | Tuning |
| Number of jaws | 3 pcs |
Suitable for the following models
| Puch |
Accessories & related products
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Chrome steel (stainless steel) · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs
CHF 299.90
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Ø inside: 13.6 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Manufacturer: HK Clutches · Thickness: 20.3 mm · Material: Steel · Material addition: Aluminum · Number of springs: 3 pcs · Number of jaws: 3 pcs · Recording type: Cone mounting · Area of application: Racing
CHF 309.90
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
CHF 9.90
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Number of components: 1 pcs · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm · Diameter: 24 mm · Diameter: 40.3 mm
CHF 43.90
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Width across flats (trigger): 27 mm · Manufacturer: GPO · Material: Steel · Surface: blackened · Width across flats Screw: 19 mm · Total length: 57 mm · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Strength class: 8.8 · Area of application: (Dis)assembly tool
CHF 19.90
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Ø inside: 64 mm · Height: 16 mm · Thread length: 40 mm · Ø outside: 75 mm · Thread type: M6x1 (standard thread) · Area of application: Special tool · Number of components: 4 pcs · Sachs OEM no.: 0276 057 000
CHF 29.90
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Number of components: 7 pcs · Area of application: (Dis)assembly tool
CHF 19.90
BGS bottom bracket / bottom hole puller with slide hammer
Span: 7 mm · Span: 28 mm · Manufacturer: BGS - Do it yourself · Clamping depth: 10 mm · Clamping depth: 20 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Total length: 285 mm · Thread type: M10x1.5 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Number of components: 10 pcs · Area of application: (Dis)assembly tool
CHF 129.90
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Surface: galvanized (blue) · Surface: rubberized · Manufacturer: swiing® ingenious parts · Height: 80 mm · Diameter: 19 mm · Area of application: Special tool · Material: Steel · Number of components: 1 pcs · Ø inside: 27 mm · Ø outside: 93 mm · Thickness: 5 mm · Total length: 290 mm · Ø Pin: 8 mm
CHF 47.90
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202 (professional tool)
Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Material: Steel · Surface: gas nitrided · Area of application: Special tool · Number of components: 11 pcs
CHF 40.30
Collection only possible with online purchase and appointment.
