Completely reworked 12V HPI ignition with built-in 60W light coil, for use with breaker ignition, suitable for your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
Advantages of the HPI ignition:
- always a constant, strong spark
- better acceleration due to small and light rotor (364 g)
- lightweight aluminum flywheel (200 g)
- better throttle response
- no more misfires
- ;
- one adjustment and never again
- little to no wear
- less temperature sensitivity
The ignition can be optionally supplemented with the programmable HPI CDI box for two ignition curves and the HPI switch. This allows you to switch between two pre-installed ignition curves.
Only for experienced mechanics:
This high-end ignition does not fit in housings designed for electronic ignition. Before installing the new earthing, the two mounting points of the impulse coil must be removed by 3 mm (see Figure 3) to create a flat surface with the other support points for the base plate. After this, it is no longer possible to mount the coil on a contact ignition.
Further adjustment work must also be expected, including on the fan wheel.
If the light coil is used, a 12V voltage regulator must be used.
With two pieces of approx. 80 mm long M6 screws, you can use the clutch puller for Puch (item 10086) to remove the flywheel again.
Further parts such as the programmable HPI CDI box or the matching HPI switch can be found in the accessories.
Branded product from the manufacturer HPI – Horse Power Ignition.
Details
| Ø cable | 7 mm |
| Manufacturer | HPI |
| Light coil voltage | 12 V |
| Performance | 60 W |
| Direction of rotation | right |
| Ø mounting plate | 90 mm |
| Ø Internal flywheel | 61.5 mm |
| Ø Flywheel outside | 140 mm |
| Mounting type | Screws |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
CHF 8.50
CHF 9.90
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
CHF 34.90
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® ingenious 280 g additional weight HPI Inox
Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 300 g · Ø inside: 39 mm · Ø outside: 95 mm · Ø bolt circle: 50 mm · Ø bolt circle: 55 mm · Number of fixing points: 7 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10 mm · Thickness: 12.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 49.90
Not in stock
HPI racing ignition 12V with light elect. Housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: HPI · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: right · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 140 mm · Ø cable: 7 mm · Mounting type: Screws · Area of application: Racing · Area of application: Tuning
CHF 349.90
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
CHF 9.90
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
CHF 34.90
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Diameter: 12 mm · Diameter: 24 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Total length: 100 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: blue galvanized · Number of components: 2 pcs
CHF 17.90
Collection only possible with online purchase and appointment.
