Press-fit tool to professionally install all ball bearings and oil seals on the Z50 2-speed engine. Also suitable for removing the bearings!
Top tool - a must for every engine overhaul!
Dimensions:
Ø tang: 16.4 mm
Tang length: 7.9 mm
Ø shoulder: 34.5 mm
Heel length: 5 mm
Ø outer: 39.5 mm
Total length: 80 mm
We recommend using a plastic hammer to protect the contact surfaces.
You will find one in addition to other tools and revision-relevant material at the bottom of the accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Number of components | 1 pcs |
| Diameter | 34.6 mm |
| Ø inside | 17.4 mm |
| Ø outside | 39.5 mm |
| Ø Pin | 16.5 mm |
| Total length | 79.9 mm |
| Area of application | Special tool |
Suitable for the following models
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) |
Accessories & related products
swiing® revival shim set crankshaft L17 | Puch Z50
Nominal diameter inside: 17 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø outside: 23.8 mm · Ø inside: 17.1 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm
CHF 8.90
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202 (professional tool)
Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Area of application: Special tool · Material: Steel · Surface: gas nitrided · Number of components: 11 pcs
CHF 40.30
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Strength class: 8.8 · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool
CHF 9.90
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Area of application: Standard · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
CHF 19.90
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Total length: 120 mm · Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Diameter: 24 mm · Diameter: 40.3 mm · Number of components: 1 pcs
CHF 43.90
Not in stock
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Thread type: MF14x1.25 (fine pitch thread) · Diameter: 12 mm · Diameter: 16 mm · Number of components: 1 pcs · Width across flats SW: 17 mm · Total length: 83 mm · Area of application: Special tool
CHF 9.50
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Total length: 290 mm · Height: 80 mm · Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Number of components: 1 pcs · Ø outside: 93 mm · Ø inside: 27 mm · Thickness: 5 mm · Ø Pin: 8 mm
CHF 47.90
Collection only possible with online purchase and appointment.
