Membrane system

swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)

Total length: 23 mm · Diameter: 4.9 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Pony spare part no.: A3700 · Sachs spare part no.: 0640 016 101 · Sachs spare part no.: 0640 016 102

swiing® revival membrane seal 0.4 mm | Sachs 50/2, 50/3, 50/4 (A1840)

Manufacturer: swiing® revival parts · Material: Oiled paper · Hole spacing inlet: 67 mm · Thickness: 0.4 mm · Pony spare part no.: A1840 · Sachs spare part no.: 0250 106 00

swiing® revival stud bolt inlet M5x26 mm galvanized (strength 10.9) | Sachs (A1474)

Total length: 26 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Thread length: 7 mm · Thread length: 14 mm · Strength class: 10.9 · Pony spare part no.: A1474 · Sachs spare part no.: 0241 031 101

Ripp-Lock washer M5 5.2/12/1.4 galvanized

Ø inside: 5.2 mm · Ø outside: 12 mm · Material: Steel · Surface: blue galvanized · Nominal diameter (thread): 5 mm · Thickness: 1.4 mm · Thread size: M5

Flange nut M5 galvanized (10 strength)

Width across flats SW: 8 mm · Height: 5 mm · Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Thread type: M5x0.8 (standard thread) · Drive: External hexagon · Strength class: 10 · Pony spare part no.: A1501 · Sachs spare part no.: 0242 024 104

Diaphragm seal engine Beta 521 & 512 (A8101)

Manufacturer: Pony · Area of application: Standard · Hole spacing inlet: 35 mm · Thickness: 2 mm · Place of use: Admission · Ø screw holder: 6.6 mm

Athena gasket set 45 mm AJH diaphragm

Manufacturer: Athena · Area of application: Tuning · Ø cylinder: 45 mm · Number of components: 5 pcs · Hole pattern [mm]: 44 x 44 mm / 60 x 40 mm · Hole spacing outlet: 42 mm

Diaphragm motor Beta 521 & 512 (A8114)

Number of fixing points: 2 pcs · Manufacturer: Pony · Area of application: Original · Number of flaps: 2 pcs · Membrane material: Fiberglass · Mounting type: Screws

Flange nut M5 galvanized (8 strength)

Width across flats SW: 8 mm · Height: 5 mm · Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Thread type: M5x0.8 (standard thread) · Drive: External hexagon · Strength class: 8

swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Number of fixing points: 4 pcs · Ø inside: 17 mm · Total length: 29 mm · Manufacturer: swiing® ingenious parts · Width: 80 mm · Material: Aluminum · Material: Steel · Area of application: Tuning · Surface: anodized · Surface: blue galvanized · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Thickness: 6.9 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Mounting type: Screws

Diaphragm insert Sachs 50/2

Number of fixing points: 2 pcs · Ø mounting hole: 5.2 mm · Material: Brass · Area of application: Standard · Number of flaps: 2 pcs · Membrane material: Spring steel · Hole spacing: 67 mm · Mounting type: Screws · Pony spare part no.: A2624 · Sachs spare part no.: 0286 213 010

Gilardoni italkit diaphragm seal

Manufacturer: Gilardoni italkit · Area of application: Tuning · Ø cylinder: 47 mm · Hole spacing inlet: 34 mm · Hole spacing inlet: 60 - 34 mm · Place of use: Admission · Hole pattern [mm]: 34 x 60

Stage6 8-folding diaphragm by Moto Tassinari (Gilardoni italkit)

Number of fixing points: 4 pcs · Total length: 77 mm · Ø mounting hole: 6.6 mm · Manufacturer: Stage6 · Width: 49 mm · Area of application: High End · Material: Plastic · Surface: raw · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.4 mm · Hole pattern [mm]: 60 x 35 mm · Mounting type: Screws

Polini 2-folding diaphragm insert

Number of fixing points: 4 pcs · Ø mounting hole: 5.3 mm · Manufacturer: Polini · Area of application: Tuning · Number of flaps: 2 pcs · Thickness: 2 mm · Hole pattern [mm]: 39 x 36/32 mm · Mounting type: Screws

Polini gasket diaphragm

Manufacturer: Polini · Ø cylinder: 45 mm · Place of use: Admission

swiing® revival stud bolt M5x26 inlet (strength 10.9) | Sachs 50/2, 50/2, 50/3

Width across flats SW: 8 mm · Total length: 26 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Drive: External hexagon · Thread length: 7 mm · Thread length: 14 mm · Strength class: 8 · Strength class: 10.9

Polini gasket diaphragm | Morini M1, M01 / M02

Manufacturer: Polini · Hole spacing inlet: 44 mm · Thickness: 0.8 mm

Polini intake system 4-folding diaphragm PHBG

Ø inside: 19 mm · Ø outside: 24 mm · Manufacturer: Polini · Area of application: Tuning · Number of flaps: 4 pcs · Mounting type: Screws

Polini lung aluminum

Manufacturer: Polini · Material: Aluminum · Area of application: Tuning · Total length: 105 mm · Total height: 40 mm · Mounting type: Cable ties

Stage6 lung aluminum

Ø inside: 4 mm · Manufacturer: Stage6 · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: chrome-plated · Color: Chrome · Ø External connection: 6 mm · Total length: 105 mm · Total length: 125 mm · Total height: 40 mm · Mounting type: Cable ties

swiing® ingenious intermediate flange 13 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Number of fixing points: 4 pcs · Ø inside: 13 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Standard · Area of application: Tuning · Surface: anodized · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Hole spacing: 31 mm · Hole spacing: 67 mm · Mounting type: Screws

Athena membrane seal set (2 pcs.)

Number of fixing points: 4 pcs · Manufacturer: Athena · Material: Sealing paper · Thickness: 0.5 mm · Hole pattern [mm]: 33 x 32 mm · Mounting type: Screws

Malossi 4-folding diaphragm carbonite Puch

Ø outside: 24 mm · Manufacturer: Malossi · Area of application: Tuning · Number of flaps: 4 pcs · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Mounting type: Screws

Malossi diaphragm plate carbonite 0.3 mm

Total length: 100 mm · Manufacturer: Malossi · Width: 100 mm · Area of application: Tuning · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm

Polini 2-folding diaphragm | Tomos

Number of fixing points: 4 pcs · Manufacturer: Polini · Area of application: Tuning · Number of flaps: 2 pcs · Hole pattern [mm]: 39 x 36/32 mm · Mounting type: Screws · Tomos spare part no.: 222238

Intermediate flange cylinder Athena AJH Puch

Number of fixing points: 4 pcs · Material: Plastic · Area of application: Tuning · Color: black-matt · Hole pattern [mm]: 60 x 40 · Mounting type: Screws

Polini gasket set 4-folding diaphragm | Puch

Manufacturer: Polini · Area of application: Tuning · Number of flaps: 4 pcs · Hole pattern [mm]: 39 x 36/32 mm

Athena diaphragm seal AJH

Manufacturer: Athena · Material: Oiled paper · Area of application: Tuning · Thickness: 0.5 mm · Place of use: Admission · Ø screw holder: 6.7 mm · Hole pattern [mm]: 40 x 62

Malossi 4-flap diaphragm Carbon Gilardoni italkit | Puch

Number of fixing points: 4 pcs · Manufacturer: Malossi · Material: Plastic · Area of application: Tuning · Number of flaps: 4 pcs · Membrane material: Carbon · Hole pattern [mm]: 61 x 39 mm / 58 x 35 mm · Mounting type: Screws

Malossi reed valve carbon 0.3 mm

Total length: 100 mm · Manufacturer: Malossi · Width: 100 mm · Area of application: Tuning · Membrane material: Carbon · Thick membrane platelets: 0.3 mm

Intermediate flange diaphragm 12 mm | Sachs 502, 50/2, 50/3, 50/4 (A2621)

Number of fixing points: 4 pcs · Ø inside: 12 mm · Material: Aluminum · Area of application: Standard · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Hole spacing: 31 mm · Hole spacing: 67 mm · Mounting type: Screws · Pony spare part no.: A2621 · Sachs spare part no.: 0286 210 001

GPO Membrane Carbon | Cilo Cross 521, 512 / Pony Cross 521, GTX 521 (A8114)

Number of fixing points: 2 pcs · Total length: 48 mm · Manufacturer: GPO · Width: 33 mm · Material: Aluminum · Area of application: Tuning · Number of flaps: 2 pcs · Membrane material: Carbon · Thick membrane platelets: 0.25 mm · Hole spacing: 35 mm · Alternative version of the Pony Spare part no.: A8114

2-folding membrane insert Athena AJH

Number of fixing points: 4 pcs · Area of application: Tuning · Number of flaps: 2 pcs · Membrane material: Spring steel · Hole pattern [mm]: 60 x 40 mm · Mounting type: Screws

Athena 22 mm intake manifold Diaphragm Dell'Orto PHBG | Puch

Number of fixing points: 4 pcs · Ø inside: 22 mm · Manufacturer: Athena · Material: Aluminum · Area of application: Tuning · Ø External connection: 26 mm · Hole pattern [mm]: 60 x 40 · Mounting type: Screws

Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch

Number of fixing points: 4 pcs · Ø inside: 28.6 mm · Ø mounting hole: 5.2 mm · Ø outside: 24 mm · Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Material: Plastic · Area of application: Racing · Area of application: Tuning · Surface: glass bead blasted · Number of flaps: 4 pcs · Membrane material: Carbonite · Thread type: M5x0.8 (standard thread) · Thick membrane platelets: 0.3 mm · Mounting type: Screws

Malossi diaphragm plate carbonite 0.35 mm

Total length: 100 mm · Manufacturer: Malossi · Width: 100 mm · Area of application: Tuning · Membrane material: Carbonite · Thick membrane platelets: 0.35 mm

Malossi diaphragm plate carbonite 0.4 mm

Total length: 100 mm · Manufacturer: Malossi · Width: 100 mm · Area of application: Tuning · Membrane material: Carbonite · Thick membrane platelets: 0.4 mm

Malossi 4-folding diaphragm insert carbonite Gilardoni italkit Puch

Number of fixing points: 4 pcs · Manufacturer: Malossi · Area of application: Tuning · Number of flaps: 4 pcs · Membrane material: Carbonite · Hole pattern [mm]: 61 x 39 mm / 58 x 35 mm · Mounting type: Screws

Polini 20 mm intake manifold 2-folding diaphragm Puch

Number of fixing points: 4 pcs · Ø inside: 20 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Tuning · Ø External connection: 25 mm · Total height: 46 mm · Mounting type: Screws

MBR plate inlet Gilardoni italkit steel

Number of fixing points: 4 pcs · Ø inside: 21 mm · Total length: 72.5 mm · Manufacturer: MBR · Width: 48 mm · Material: Steel · Area of application: Tuning · Surface: raw · Thickness: 5 mm · Hole pattern [mm]: 60 x 35 mm · Mounting type: Screws

Polini 2-folding diaphragm Puch

Number of fixing points: 4 pcs · Ø mounting hole: 5.3 mm · Manufacturer: Polini · Area of application: Tuning · Number of flaps: 2 pcs · Thickness: 2 mm · Hole pattern [mm]: 39 x 36/32 mm · Mounting type: Screws

MLM 19 mm intake manifold Polini 4-folding diaphragm Dell'Orto PHBG, CP | Puch

Ø inside: 25.3 mm · Manufacturer: MLM · Material: Steel · Area of application: Tuning · Surface: varnished · Color: black · Ø External connection: 28.5 mm · Total height: 80 mm · Mounting type: Plug connection clamped

MBR cover diaphragm inlet Gilardoni italkit | Puch

Number of fixing points: 4 pcs · Total length: 72.5 mm · Ø mounting hole: 6.3 mm · Manufacturer: MBR · Width: 48 mm · Material: Steel · Area of application: Tuning · Surface: raw · Thickness: 5 mm · Hole pattern [mm]: 60 x 35 mm · Mounting type: Screws

Membrane transpacer Polini Trapez 12 mm aluminum | Puch ZA50

Number of fixing points: 4 pcs · Total length: 50 mm · Ø mounting hole: 5.4 mm · Width: 42.5 mm · Width: 46 mm · Material: Aluminum · Area of application: Tuning · Surface: blank · Thickness: 12 mm · Hole pattern [mm]: 32 / 36 x 39 · Mounting type: Screws

swiing® ingenious intermediate flange 12 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Number of fixing points: 4 pcs · Ø inside: 12 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Standard · Surface: anodized · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Hole spacing: 31 mm · Hole spacing: 67 mm · Mounting type: Screws

Malossi gasket set 4-folding diaphragm

Number of fixing points: 4 pcs · Manufacturer: Malossi · Material: Sealing paper · Area of application: Tuning · Mounting type: Screws

Malossi diaphragm plate carbonite | Minarelli, Morini

Number of fixing points: 2 pcs · Total length: 38 mm · Ø mounting hole: 3 mm · Manufacturer: Malossi · Width: 20 mm · Material: Carbonite · Area of application: Tuning · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Thick membrane platelets: 0.35 mm · Hole spacing: 8 mm · Mounting type: Screws

Gasket set diaphragm Gilardoni italkit Puch

Area of application: Tuning · Number of components: 2 pcs · Hole pattern [mm]: 60 x 35 mm

MLM 19 mm intake manifold Polini 2-folding diaphragm Dell'Orto PHBG, CP | Puch

Number of fixing points: 4 pcs · Ø inside: 19 mm · Manufacturer: MLM · Material: Steel · Area of application: Tuning · Surface: varnished · Color: black · Ø External connection: 23 mm · Total height: 67 mm · Mounting type: Screws

Malossi reeds carbon & fiberglass 0.3 / 0.35 / 0.4 mm

Number of fixing points: 2 pcs · Manufacturer: Malossi · Area of application: Tuning · Number of flaps: 2 pcs · Membrane material: Carbon · Membrane material: Glass fiber · Thick membrane platelets: 0.3 mm · Thick membrane platelets: 0.35 mm · Thick membrane platelets: 0.4 mm · Mounting type: Screws

Polini 2-folding diaphragm Peugeot 103

Number of fixing points: 4 pcs · Ø mounting hole: 5.3 mm · Manufacturer: Polini · Area of application: Tuning · Number of flaps: 2 pcs · Thickness: 2 mm · Hole pattern [mm]: 39 x 36/32 mm · Mounting type: Screws

Gilardoni italkit 4-folding diaphragm original

Number of fixing points: 4 pcs · Ø mounting hole: 6.3 mm · Manufacturer: Gilardoni italkit · Area of application: Tuning · Number of flaps: 4 pcs · Membrane material: Carbon · Hole pattern [mm]: 60 x 35 mm · Mounting type: Screws

Polini intake system 4-folding diaphragm SHA

Ø inside: 15 mm · Ø outside: 19 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Tuning · Number of flaps: 4 pcs · Mounting type: Screws

Malossi 2-folding diaphragm insert

Number of fixing points: 4 pcs · Manufacturer: Malossi · Area of application: Tuning · Number of flaps: 1 pcs · Hole pattern [mm]: 39 x 36/32 mm · Mounting type: Screws

DMP 4-folding diaphragm insert

Number of fixing points: 4 pcs · Manufacturer: DMP · Area of application: Tuning · Number of flaps: 4 pcs · Hole pattern [mm]: 60 x 40 mm · Mounting type: Screws

Malossi 4-folding diaphragm carbonite Peugeot 103 / 104 / 105

Ø outside: 24 mm · Manufacturer: Malossi · Area of application: Tuning · Number of flaps: 4 pcs · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Mounting type: Screws

Athena 2-folding diaphragm Puch / Sachs

Number of fixing points: 4 pcs · Manufacturer: Athena · Area of application: Tuning · Number of flaps: 2 pcs · Membrane material: Spring steel · Mounting type: Screws

Malossi gasket set 2-folding diaphragm for Polini 43.5 mm | Puch

Number of fixing points: 4 pcs · Manufacturer: Malossi · Material: Sealing paper · Area of application: Tuning · Hole pattern [mm]: 39 x 36/32 mm

Malossi diaphragm insert carbon 0.3 mm | Peugeot 103 / BYE BIKE

Number of fixing points: 4 pcs · Total length: 50 mm · Ø mounting hole: 5.4 mm · Manufacturer: Malossi · Width: 43 mm · Width: 47 mm · Camouflaged: No · Material: Plastic · Area of application: Tuning · Surface: raw · Number of flaps: 1 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Thickness: 3 mm · Hole pattern [mm]: 32 / 36 x 39 · Mounting type: Screws

Membrane box for ADDY GME engine housing "der.pruefstand" | Puch E50

Total length: 48 mm · Width: 66 mm · Material: Aluminum · Thread type: M6x1 (standard thread) · Hole pattern [mm]: 37 x 55 · Hole spacing: 52 mm